Alumni Dissertations and Theses
Click on the column headings below to sort the table.
To search for specific alumni or dissertations, press CTRL+F or COMMAND+F to use your browser's search feature.
Last Name | First Name | Degree | Year | Thesis/Dissertation |
---|---|---|---|---|
Acharya | Sunil | Ph.D. | 2005 | Micromechanics of Asperity Interaction in Wear - A Numerical Approach |
Adames | Juan | Ph.D. | 2007 | Characterization of Polymeric Binders for Metal Injection Molding (MIM) Process |
Adebayo | Gbolarumi | Ph.D. | 2001 | Design, Validation and Implementation of On-Line Measurement Techniques to Study the Phase Behavior of Partially Miscible PMMA/PaMSAN Blends Under Quiescent and Flow Conditions, and Application to Filled-PVC in Quiescent Mode |
Adewale | Ajayi | Ph.D. | 1993 | Experimental and Theoretical Isothermal Flow Studies in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
Adewale | Kolapo | Ph.D. | 1996 | Modeling of Melt Flow Instabilities of High Molecular Weight Polymer with Narrow Molecular Weight Distribution |
Adwani | Sunil | M.S. | 2003 | The Use of Excimer Laser Evaluation of Processing Effects in Injection Molded PS and PC |
Agarwal | Sheel | M.S. | 2000 | Development and Application of Lambourn Type Abrasion Tester on NR and SBR Blends |
Agrawal | Aparna | Ph.D. | 2023 | Multifunctional Aerogels through Structural and Morphology Control: Additive Manufacturing and Coatings Aided Approach |
Ahmad Nazir | Nadzrinahamin | Ph.D. | 2011 | Modification and Characterization of Nafion Perfluorinated Ionomer Membrane for Polymer Electrolyte Fuel Cells |
Ahn | Dae Up | Ph.D. | 2007 | Well-Aligned 3-Dimensional Self-Assembly in Block Copolymers and Their Nanotechnological Applications |
Ahn | Sungtae | Ph.D. | 2003 | The Influence of Additives and Additive Migration on Rheological Properties and Processing of Polymer Melt Compounds |
Ahn | Yongjin | M.S. | 1994 | Wear of Slipping Wheels |
Al-Munif | Munif Hamad | M.S. | 2003 | Enhancement of Mechanical Properties of Polyethylene Terephthalate Via In-Situ Compatibilization Process with Linear Low Density Polyethylene Modified with Glycidyl Methacrylate and Organic Clay |
Al-Salloum | Mohammed | M.S. | 2021 | Use of Pyrolyzed Soybean Hulls as Filler in Polyamide-6 |
Al-Yamani | Faisal | M.S. | 2005 | A Route to Enhanced Intercalation in Rubber Silicate Nanocomposites |
Albehaijan | Hamad | M.S. | 2017 | Approaches to Enhance Filler-Polymer Interactions and Cure Properties of Rubber Compounds |
Albehaijan | Hamad | Ph.D. | 2020 | Approaches Toward Optimum Mechanoelectrical and Electrochemical Performance of Ion Containing Polymer Composites |
Almazrou | Yaser | M.S. | 2018 | Effects of Mobile Nanoparticles on the Morphology and Topography of Polysulfone/Polyimide Thin Films |
Almazrou | Yaser | Ph.D. | 2023 | Development and Optimization of Flexoelectric and Electrochemical Performance of Multifunctional Polymer Electrolyte Membranes for Energy Harvesting and Storage |
Alrashed | Maher | M.S. | 2013 | Polyurethane/Polysiloxane Ceramer Nanocomposite Coating for Aircraft Applications |
Alrashed | Maher | Ph.D. | 2017 | Organic/Inorganic Hybrid Coatings for Anticorrosion Applications |
Alyamac | Elif | Ph.D. | 2009 | Self-Stratifying Coatings |
Ammar | Ali | M.S. | 2012 | The Morphology and Mechanical Properties of Polysulfone/Polyimide Nanocomposite Films |
Ammar | Ali | Ph.D. | 2018 | Reduction of Graphene Oxide using Microwave and its Effect on Polymer Nanocomposites Properties |
Ariza | Nathan | M.S. | 2018 | An Investigation on Compressive Mechanical Properties of Syndiotactic Polystyrene Gels and the Conductive Behavior of Syndiotactic Polystyrene Ionogels |
Asiri | Abdulaziz | M.S. | 2003 | A Novel Economical Method to Improve the Toughness of Carbon/Epoxy Long Fiber Components by the Integration of Carbon/Epoxy Tow Loops Core |
Asti | Kevin | M.S. | 2016 | Evaluation of the Efficacy of Zinc Sulfonated EPDM Ionomer as an Impact Modifier for Polyamide6 |
Aussawasathien | Darunee | Ph.D. | 2006 | Electrospun Conducting Nanofiber-Based Materials and Their Characterizations: Effects of Fiber Characteristics on Properties and Applications |
Ayrom Keuchel | Haleh | Ph.D. | 1997 | Development of Spatial Structural Hierarchy in Injection Molded Isotactic Polypropylene |
Ayyer | Ravishankar | M.S. | 2003 | Rheology of Polyamide-6/Montmorillonite Based Silicate Polymer/Layered Nanocomposites |
Azari | Arsalan | M.S. | 1988 | Shear-Free Squeezing Flow of Polymer Melts - Equibiaxial Stretching |
Azmoudeh | Mohammad | M.S. | 1992 | Synergistic Processing Strategies in Forging of Polymer-Metal Powder Mixtures |
Babrowicz | Robert | M.S. | 1989 | The Effect of Polystyrene Domain Structure on the Rheological Behavior and Adhesive Performance in a Styrene-Isoprene-Styrene Pressure Sensitive Adhesive |
Baena | Johanna | Ph.D. | 2006 | Processing and Kinetic Studies of the Reactive Blends of Poly(vinylchloride) and Thermoplastic Polyurethanes |
Bahl | Kushal | M.S. | 2010 | Optimum Process Conditions for Production of Thermally Conductive Polymer Compounds Using Boron Nitride |
Bahl | Kushal | Ph.D. | 2014 | Towards Development of Lignin Reinforced Elastomeric Compounds with Reduced Energy Dissipation |
Bai | Lan | M.S. | 2001 | The Effects of Filler Volume Fraction and Film Thickness on Resistivity of Conductive Adhesives |
Bajpai | Vardhan | Ph.D. | 2005 | Syntheses, Characterization and Applications of Micro-/Nano-Structured Conducting Polymers and Carbon Nanotubes |
Bakan | Murat | Ph.D. | 2015 | Development of Polymer Resin-based Wet Friction Sheet Materials and Understanding their Interactions with Automatic Transmission Fluids |
Ban | Kyun Ha | Ph.D. | 2008 | Mechanism and Significance of Slip and New Mixing Elements During Flow in Modular Intermeshing Co-Rotating Twin Screw Extruders |
Bandyopadhyay | Diya | Ph.D. | 2012 | Controlling Polymer Thin Film Instabilities via Tuning of Polymer-Substrate Interactions and Suppression of Capillary Waves |
Bang | Dae-Suk | Ph.D. | 1996 | Theoretical and Experimental Flow Studies in Modular Tangential Counter-Rotating Twin Screw Extruders |
Bas | Gamze | Ph.D. | 2017 | Predictive Modeling for Rate Dependent Toughened-Adhesive Behavior During Impact |
Bas | Serkan | Ph.D. | 2009 | Synthesis of Hybrid Latexes and Polymerization Kinetics of Functional Latexes |
Basak | Sayan | Ph.D. | 2023 | Structure-Property Relationships of High CIS 1.4 Polybutadiene Based Shape Memory Polymers |
Basutkar | Monali | Ph.D. | 2018 | Directed Self-Assembly of Nanostructured Block Copolymer Thin Films via Dynamic Thermal Annealing |
Batra | Saurabh | Ph.D. | 2014 | Field Assisted Self Assembly for Preferential Vertical Alignment of Particles and Phases using a Novel Roll-to-Roll Processing Line |
Bawiskar | Santosh | M.S. | 1992 | Simulation of Heat Transfer: Warpage and Residual Stresses in Rotational Molding |
Bawiskar | Santosh | Ph.D. | 1997 | Experimental and Theoretical Investigation of Solids Conveying, Melting and Global Behavior in Self Wiping Co-Rotating Twin Screw Extruders |
Beers | Adam | M.S. | 1999 | Deformation Behavior and Structural Development of Polyethylene Naphthalate/Polycarbonate Blends |
Belatreche | Mehdi Jean | M.S. | 2002 | A Theoretical and Experimental Study of Liquid Crystalline Polymers |
Beltran Osuna | Angela | M.S. | 2011 | Evaluation of Antifouling Materials Based on Silica Gels |
Benavides Gonzalez | Rafael | Ph.D. | 2013 | Gas Jet Process for Production of Sub-micron Fibers |
Benes | Michal | M.S. | 2002 | Improved Properties of Short Fiber Rubber Composites through Nanoscale Co-reinforcement |
Bethea | Robert | M.S. | 2014 | The Effects of Carbon Black Reinforcement Systems on Crosslinked Shape Memory Elastomers |
Bhadauriya | Sonal | Ph.D. | 2019 | Relaxation Behaviour of Patterned Composite Polymer Surfaces and Underlying Compensation Phenomenon |
Bhaway | Sarang | Ph.D. | 2016 | Fabrication of Block Copolymer Templated Mesoporous Metal Oxide Composites for Energy Storage Applications |
Bhuva | Nihir | M.S. | 2003 | Polymer Blends Comprising Nano-Clay for Enhanced Permeation Barrier in Packaging Applications |
Bicakci Jenkins | Sirarpi | Ph.D. | 2000 | Miscibility, Uniaxial Deformation Behavior and Annealing Studies in Binary and Ternary Blends of Poly(ethylene naphthalate), Poly(ether imide), and Poly(ether ether ketone) |
Birman | Vyacheslav | Ph.D. | 1999 | Studies of High Deborah Number Flows of Polymer in Channels and Pipes |
Boles | David | M.S. | 1994 | The Effect of Mold Cavity Geometry on Orientation Development in Injection Molding of Thermotropic Liquid Crystalline Polymers |
Bora | Sunil | M.S. | 1992 | Development of a Device for Obtaining Uniform Thickness in Thermoforming of Barrier Materials |
Bouscher | Robert | Ph.D. | 2021 | Advancements in Powder Coating Processing and in Real-Time Film Formation Analysis of Thermoset Coatings |
Brenno | Steve | M.S. | 2004 | A Process Route to the Synthesis of Polymer Matrix Nanocomposites with Mixed-Geometry Inclusions |
Brostowitz | Nicole | Ph.D. | 2014 | Shape Memory Rubber Bands and Supramolecular Ionic Copolymer |
Buddhiranon | Sasiwimon | Ph.D. | 2012 | Phytochemical Modification of Biodegradable/Biocompatible Polymer Blends with Improved Immunological Responses |
Bumm | Sug Hun | Ph.D. | 2010 | Mixing Studies and Simulation of Compounding Chopped Fiber and Silica Filler into Thermoplastics in a Modular Co-Rotating Twin Screw Extruder |
Cai | Feng | M.S. | 1992 | Rubber Modified Copolyester Thermoplastic Elastomer |
Cai | Liang | M.S. | 2016 | Graft Copolymer Aerogels from Sulfonated Syndiotactic Polystyrene Functionalized with a Quaternary Phosphonium-containing Raft Agent |
Cai | Zhuoyun | M.S. | 2018 | Influence of Applied Voltage on Dewetting of Polymer Thin Films |
Cano | Camilo | Ph.D. | 2005 | Polyimide Microstructures from Powdered Precursors: Phenomenological and Parametric Studies on Particle Inflation |
Cao | Du | M.S. | 1995 | A Study of Elastic Recovery of Rubber Vulcanizates Within Very Short Time Intervals for Dynamic Sealing Applications |
Cao | Feina | Ph.D. | 2008 | Shape Memory Polyurethane Nanocomposites |
Cao | Jinwei | M.S. | 2014 | Phase Diagram Approach to Control of Ionic Conductivity and Electrochemical Stability of Solid Polymer Electrolyte Membrane for Li-Ion Battery Application |
Cao | Jinwei | Ph.D. | 2018 | Bioelectricity Inspired Polymer Electrolyte Membranes for Sensing and Energy Harvesting Applications |
Cao | Yuanmei | Ph.D. | 2012 | Antireflective Polyimide Based Films |
Cardenas | Salvador | M.S. | 2000 | Effect of Glass Fibers on the Behavior of LCP/PEI Blends |
Carrillo | Antonio | Ph.D. | 2008 | Residual Stresses and Birefringence in Gas-Assisted Injection Molding of Amorphous Polymers: Simulation and Experiment |
Catignani | Umberto | M.S. | 1996 | Molecular Weight Effect on Growth, Nucleation, and Crystallization Rates of I-PP and Predictions of Morphology and Crystallization During Quenching |
Cavak | Murat | M.S. | 1999 | Fatigue Strength Studies in Polyvinyl Chloride Pipe Joints |
Cha | Jae Hyug | Ph.D. | 2001 | Polymer Modification with Various Monomers in a Batch Mixer and a Twin Screw Extruder: Experiment and Kinetic Modeling |
Chai | Qinyuan | M.S. | 2013 | Synthesis and Characterization of Ionically Crosslinked Networks |
Chakraborty | Ruby | Ph.D. | 2008 | Development of Novel Cycloaliphatic Siloxanes for Thermal and UV-Curable Applications |
Chamulitrat | Sutin | M.S. | 1993 | Dynamic Vulcanization of Thermoplastic Copolyester Elastomer/Nitrile Rubber Blends: Effect of Curing System |
Chandrasekaran | Neelakandan | Ph.D. | 2010 | Miscibility, Morphology and Biocompatibility Studies of Novel Hemodialysis Membranes with Enhanced Anti-Oxidant and Anti-Inflammatory Properties |
Chang | Do-Hoon | Ph.D. | 2000 | Comparison of Reactive Extrusion in Different Continuous Mixing Machines |
Chang | I-Ta | Ph.D. | 2012 | Excimer Laser Ablation of Polymer-Clay Nanocomposites |
Chang | Ming-Chi | M.S. | 1996 | Miscibility Phase Diagrams of the Mixtures of Side-On Side-Chain Liquid Crystalline Polymers and Low Molar Mass Liquid Crystals |
Chang | Sukky | Ph.D. | 1997 | Effect of Chemical Structure on Phase Transition-Rheology-Morphology Relationships in Main-Chain Liquid-Crystalline Polymers |
Chang | Teng | Ph.D. | 2015 | Studies of Genistein Modified Poly(ether sulfone)/Poly(vinyl pyrrolidone) and Poly(vinyl chloride)/Epoxidized Soybean Oil Blends with Enhanced Blood-compatibility for Biomedical Applications |
Chang | Young-Wook | Ph.D. | 1993 | Internal Fracture of Rubber Blocks |
Chapa Garza | Jose | M.S. | 2013 | A Comparative Study of the Morphology of Flow and Spin Coated P3HT:PCBM Films |
Chen | Cheng-Chung | Ph.D. | 1992 | Influence of Compatibilizers on Morphological and Mechanical Properties of Polymer Blends |
Chen | Chiu-Yen | M.S. | 1993 | Characterization of Phase Morphologies and Mechanical Properties of Blends of Isotactic Polypropylene and Ethylene Propylene Diene Terpolymer |
Chen | Haifeng | M.S. | 1996 | Fatigue Strength Studies in Polyethylene Pipe Joints |
Chen | Hongyan | M.S. | 2008 | Simulations of Shearing Rheology of Thermotropic Liquid Crystalline Polymers |
Chen | Jianhua | Ph.D. | 1995 | Isothermal Thickening and Thinning Processes in Low-Molecular-Mass Poly(ethylene oxide) Fractions Crystallized From the Melt |
Chen | Keke | Ph.D. | 2019 | Roll-to-Roll Manufacturing and Real-Time Characterization of Bio-Functional Polymers |
Chen | Long | M.S. | 2013 | Self Stratifying Coatings |
Chen | Po Yun | M.S. | 2020 | Role of Ionic Liquid in Electroactive Polymer Electrolyte Membrane for Energy Harvesting and Storage |
Chen | Shide | M.S. | 1991 | Miscibility and Phase Segregation Studies in Poly-p-phenylene Denzobisoxazole/Polyamides Molecular Composites |
Chen | Wenhe | M.S. | 2019 | Tribological Interactions between Virgin Hair Fibers at Nanoscale |
Chen | Xiaocheng | M.S. | 2017 | Synthesis of 10-Carboxy-N-Decyl-N, N'-Dimethydecyl-1-Ammonium Bromide as Organogelator |
Chen | Yan | M.S. | 2014 | Investigation of Single and Double Network Gels by Maximum Bubble Pressure Rheology |
Chen | Ying | M.S. | 2013 | Simple Fabrication of Hierarchical Multiscale Patterned Flexible PDMS Film and Ice-retarding Property Study |
Chen | Ying | Ph.D. | 2017 | Patterning Elastomer, Thermoplastics and Shape Memory Material by UV Lithography and Soft Lithography |
Chen | Yuxuan | M.S. | 2015 | Morphology Development of Block Copolymer and Homopolymer Blend Films |
Chen | Zhiyuan | M.S. | 2018 | Novel All-Solid-State Asymmetric Supercapacitors with Metal Selenides Electrodes and Highly Ionic-Conductive Gel Electrolyte |
Cheng | Yizi | M.S. | 2017 | The Decoupling Behavior between Segmental Dynamics and Conductivity in Polymerized Ionic Liquids |
Chidambaram | Anand | M.S. | 1995 | Reactive Blending of Waste Rubber with Thermoplastics |
Chittavanich | Pongsith | M.S. | 2009 | Pigmented UV-Curable Alkyd |
Chiu | Fang-Chyou | M.S. | 1991 | Basic Studies of Miscibility and Interdiffusion of Vinyl Chloride Polymers and Poly(e-caprolactone) Blends |
Chiu | Hao-Wen | M.S. | 1995 | Phase Behavior in Mixtures of Side-Chain Liquid Crystalline Polymers and Low Molar Mass Liquid Crystals |
Chiu | Hao-Wen | Ph.D. | 1998 | Phase Equilibria and Self-Organizing Behavior of Side-Chain Liquid Crystalline Polymer Mixtures |
Cho | Jae Whan | Ph.D. | 1998 | Development of Phase Morphology in Blending for Modular Co-rotating and Counter-Rotating Twin Screw Extruders |
Cho | Myung Ho | Ph.D. | 1991 | Structure Development and Deformation Mechanism During Biaxial Stretching of Gelation Crystallized Ultrahigh Molecular Weight Polyethylene Films |
Cho | Szu-Hao | Ph.D. | 2020 | Facile and Fast Fabricatiion of Functional Thin Films via Polyelectrolyte Layer-by-Layer Assembly |
Choi | Cheol-Ho | Ph.D. | 2000 | Comparative Study of Structure Development in Melt Processing (polyethylene and isotactic polyolefins: polypropylene, polybutylene and poly-4-methylpentene-1) |
Choi | Dongman | Ph.D. | 2002 | Structure Development of Polypropylenes of Varying Stereo Forms and Tacticity in Melt Spinning, Tubular Blown Film Extrusion and Injection Molding |
Choi | Jae Hyuck | M.S. | 1999 | Synthesis of Side Chain Liquid Crystalline Polymer and Phase Separation Behavior and Phase Morphology of LCP/K-21 Mixtures |
Choi | Jaesun | Ph.D. | 2013 | Ultrasonically Aided Extrusion of Rubber Nanocomposites and Rubber Blends |
Choi | Jonghan | Ph.D. | 2001 | A Study of Structure Evolution During Deformation and Subsequent Heat-Setting Process in Poly(ethylene terephthalate) and Poly(ether imide) Binary Miscible Blends |
Choi | Kyungwoo | Ph.D. | 2001 | Processing and Characterization of a Petroleum Isotropic Pitch, a Synthetic Mesophase Pitch, and their Blends for the Preparation of Carbon Fibers and Moldings |
Choi | Soobum | Ph.D. | 2003 | Rheology, Phase Transition and Morphology of ABA-Type and ABC-Type Triblock Copolymers |
Chu | Lih-Long | M.S. | 1991 | Experiments and Analysis of Polymerization of Methyl Methacrylate in a Model Twin-Screw Extruder |
Chu | Lih-Long | Ph.D. | 1995 | Flow Analysis of Polymerization in a Model Twin Screw Extruder |
Chu | Ming-Hou | M.S. | 1990 | Deformation Behavior and Dynamic Filler-Rubber Interaction of Poly(ethyl Acrylate) and Filled Compounds |
Chun | Hyunaee | Ph.D. | 1997 | Effect of Molecular Characteristics on Strength of Elastomer |
Chun | Seung Bum | Ph.D. | 1999 | Morphology of Ternary Polymer Blends Containing a Block Copolymer as Compatibilizing Agent |
Chung | Oansuk | Ph.D. | 1998 | The Effects of Polymer Selection and Dynamic Vulcanization on the Morphology and Properties of Rubber/Plastic Blends |
Churdpunt Ruksakulpiwat | Yupaporn | Ph.D. | 1999 | Quiescent and Shear-Induced Crystallization of Ziegler-Natta and Metallocene Based Isotactic Polypropylenes |
Cobaj | Anisa | Ph.D. | 2019 | The Effects of Urethane Methacrylates on the Film Properties of Acrylic-Urethane Hybrid Latexes |
Coben | Collin | M.S. | 2020 | Use of Pyrolyzed Soybean Hulls as Fillers in Polyolefins |
Costantino | Gregory | M.S. | 1995 | Thermal and Pressure Buildup During the Abrasion of Elastomers |
Cronin | Steven | M.S. | 1998 | The Effect of Composition and Processing Conditions on the Structure Development in Injection Molded Dynamically Vulcanized PP/EPDM Blends |
Crowder | Matthew | M.S. | 2017 | Rheological Analysis of Uncrosslinked Rubber Compounds and the Characterization of an Apparatus for Forming an Elastomeric Strip |
Cui | Xiaoyu | M.S. | 2017 | Polycation Reinforced Sulfonated Syndiotactic Polystyrene Gels and Self-Healing Latex Containing Polyelectrolyte Multilayers |
Dabke | Udayan | M.S. | 2022 | Processing and Engineering Properties of HDPE/Pyrolyzed Soybean Hulls/Carbon Black Composites |
Dariush | Bahman | M.S. | 1995 | Effect of Fillers on Spin Welding of Polypropylene |
Das | Pritam | M.S. | 2004 | Internet Controlled Thermoplastic Impregnation of Glass Roving with Pultrusion |
Dayal | Pratyush | Ph.D. | 2007 | Dynamics and Morphology Development in Electrospinning of Polymer Solutions |
Demiray | Mehmet | M.S. | 1996 | Effect of Processing Conditions on Crystallinity and Microstructure of Injection Moldings of Polypropylenes of Various Molecular Weights |
Deng | Guodong | M.S. | 2014 | Self-Assembly of Poly(ethylene oxide)-Block-Poly(ethyl acrylate)-Block-Polystyrene with Phenolic Resins |
Deng | Guodong | Ph.D. | 2018 | Synthesis and Characterization of Ionically Cross-Linked Networks through the Use of Ion-Pair Comonomer |
Deng | Jone-Shin | Ph.D. | 1990 | Basic Study of Injection Molding of Rubber Compounds |
Deshpande | Swati | M.S. | 2000 | Rheological Modeling of Silica Filled SBR |
Dharaiya | Dhawal | M.S. | 2002 | Studies on Ternary Blends of Polybutylene Terephthalate and Polyamide 6 with Phenoxy Resins |
Dharaiya | Dhawal | Ph.D. | 2006 | Effects of Nanoclay and Conductive Carbon Black on Morphology Development in Chaotic Mixing of Immiscible Polymers |
Diao | Bing | M.S. | 1997 | Basic Study of Continuous Ultrasonic Devulcanization of Unfilled Silicone Rubber |
Diaz Vela | Daniel | Ph.D. | 2018 | Origins and Implications of Translational/Reorientational Decoupling in Bulk and Nanoconfined Glass-Forming Liquids |
Ding | Ran | M.S. | 1994 | Self-Reinforced Prepregs, Laminates and Injection Moldings of LCP/LCP Blends |
Ding | Ran | Ph.D. | 1997 | Chemorheology of Filled Rubber Compounds |
Dirama | Taner | M.S. | 2002 | Processing Behavior of Layered Silicate Nanocomposites in Film Blowing |
Dolog | Rostyslav | Ph.D. | 2013 | Shape Memory Behavior of Ionomers and Their Compounds |
Dong | Hui | M.S. | 2015 | Devulcanization of Waste EPDM Rubber and Manufacturing of Polypropylene (PP)/Waste EPDM Thermoplastic Elastomers using Ultrasonically Aided Extrusion |
Doni | Shashishekhar | M.S. | 2001 | Shear-Induced Migration of Particles in Filled Polymers : Effects on Conductivity and Mechanical Properties |
Du | Ling | Ph.D. | 2008 | Highly Conductive Epoxy/Graphite Polymer Composite Bipolar Plates in Proton Exchange Membrane (PEM) Fuel Cells |
Duan | Di | M.S. | 2016 | Organic/Inorganic Epoxy Hybrid Coatings for Anticorrosion Application |
Duan | Yannan | Ph.D. | 2012 | Fundamental Studies on Polymer and Organic-Inorganic Hybrid Nanoparticles Reinforced Silica Aerogels |
Duan | Yipin | M.S. | 2017 | Mechanical Properties of Supramolecular Nanocomposite Hydrogels formed by Solution Assembly of Graphene Oxide with Polyelectrolytes |
Duran | Hatice | Ph.D. | 2004 | Anisotropical Patterned Photopolymerization-Induced Phase Separation of Self-Assembled Nano-Composites with Liquid Crystals and Multi Functional Monomers |
Dworak | David | Ph.D. | 2005 | Synthesis, Characterization, and Evaluation of Cycloaliphatic Substituted Silane Monomers and Polysiloxanes for Photo-Curable Aerospace Coatings |
Dziczkowski | Jamie | Ph.D. | 2008 | Advances in Acrylic-Alkyd Hybrid Synthesis and Characterization |
Dzienis Drum | Krystle | M.S. | 2010 | Mechano-optical Behavior and Structure Development in Nylon MXD6 Films Biaxially Stretched and the Effect on Oxygen Permeability Properties |
Ebner | Karl | M.S. | 1992 | An Experimental Investigation of Polypropylene Degradation in Different Processing Machines |
Echeverri | Mauricio | Ph.D. | 2012 | Phase Diagram Approach to Fabricating Electro-Active Flexible Films: Highly Conductive, Stretchable Polymeric Solid Electrolytes and Cholesteric Liquid Crystal Flexible Displays |
Emami | Fatemesadat | Ph.D. | 2013 | Thermodynamically Consistent Interatomic Potentials for Silica to Design Specifically Binding Peptides: Role of Surface Chemistry, pH, and Amino Acid Sequence |
Erden | Numan | M.S. | 2009 | Polyurethane-Polybenzoxazine Based Shape Memory Polymers |
Ertekin | Ayca | Ph.D. | 2008 | Analysis of Wetting, Flow and Final Properties of Resin Transfer Molded Epoxy-Glass Fiber Composites Enriched with Nanoscale Reinforcements |
Extrand | Charles | Ph.D. | 1990 | Surface Studies of Polymers |
Famili | Navid | Ph.D. | 1991 | Viscoelastic Modeling of Injection Molding of Thermoplastics |
Fan | Shaobin | Ph.D. | 2000 | Macroscopic Phase Decomposition in Block Copolymers Driven by Thermooxidative Reactions |
Fan | Xiyun Serene | Ph.D. | 1991 | Rheological Properties and Model for Particle Filled Polymer Melts |
Farrell | Erin | Ph.D. | 2021 | Development of Emulsion-Templated Polyimide Aerogel Monoliths and Sheets |
Fei | Pengzhan | Ph.D. | 2013 | Investigation of a Side-Chain Crystalline Shape Memory Block Copolymer and Maximum Bubble Pressure Rheology of Organogels |
Feng | Chenrun | M.S. | 2017 | Physical and Electrochemical Investigations of Various Dinitrile Plasticizers in Highly Conductive Polymer Electrolyte Membranes for Lithium Ion Battery Applications |
Feng | Jiawei | M.S. | 2017 | Compatibility and Shape Memory Effect Study of Maleated Ethylene Propylene Copolymer(MAn-g-EPM)/Fatty Acid Blends |
Feng | Lei | Ph.D. | 2013 | Synthesis and Characterization of Ionically Bonded Diblock Copolymers |
Feng | Li | Ph.D. | 2012 | Investigation of the Relationships between the Thermodynamic Phase Behavior and Gelation Behavior of a Series of Tripodal Trisamide Compounds |
Feng | Wenlai | Ph.D. | 2004 | The Reclaiming of Butyl Rubber and In-Situ Compatibilization of Thermoplastic Elastomer by Powerful Ultrasound |
Feng | Yixiao | M.S. | 2018 | Zinc Aluminum Phosphate Pigmented Polyurethane/Polysiloxane Coatings for Anticorrosion |
Festa | Daniel | M.S. | 1993 | The Instrumented Spin Welding of Filled and Unfilled Thermotropic Liquid Crystalline Polymer |
Fiorentini | Francesca | Ph.D. | 2004 | Fundamentals of Structuring During Mixing and Deformation of Rubber Compounds Studied by Real Time Sensing Techniques |
Fong | Dinghuei | M.S. | 2005 | Finite Element Analysis of Compressive Stress Relaxation in Ethylene/Acrylic Elastomer |
Fong | Yat-Pui | M.S. | 1999 | Evaluation of Phase Morphology and Dispersion of Polymer Blends with Ultrasound Waves |
Fonner | Adam | M.S. | 2019 | An Investigation on Syndiotactic Polystyrene Aerogel Coating of Macroporous Fabric via Dip Coating Method |
Fotoohi-Ghiam | Farid | M.S. | 1990 | Injection Molding of Polymer Blends |
Fu | Guopeng | M.S. | 2013 | Molecular Complexation and Phase Diagrams of Urea/Polyethylene Glycol Mixtures |
Fu | Guopeng | Ph.D. | 2017 | Investigation on Structure-Property Relationships in Highly Ion-Conductive Polymer Electrolyte Membranes for All-Solid-State Lithium Ion Batteries |
Fu | Qiang | M.S. | 2017 | Polymer-templated Crystallization of Perovskite Film and Conductive Ionomer Doped Perovskite Film for High Performance of Perovskite Solar Cells |
Fu | Xuewei | M.S. | 2015 | Graphene/V2O5 Hybrid Aerogels as Electrode Materials for Electrochemical Capacitors |
Fu | Yao-Tsung | Ph.D. | 2011 | Molecular Simulation of Dispersion and Mechanical Stability of Organically Modified Layered Silicates in Polymer Matrices |
Fujiyama-Novak | Jane | Ph.D. | 2009 | The Rolel of Nanoclay on the Deformation Behavior of Polypropylene/Maleic Anhydride Modified Polypropylene Films and Fibers in Full and Partially Molten State Processing |
Gagov | Atanas | Ph.D. | 2007 | Instabilities in Elongation Flows of Polymers at High Deborah Numbers |
Gaikwad | Sanjeev | M.S. | 1994 | A Study of Dynamic Vulcanization of Polycarbonate and Fluoroelastomer Blends |
Galle | Fred | M.S. | 1997 | Experimental Study of Flow Mechanisms and Mixing in a Kobe Steel Nex-t Continuous Mixer |
Gao | Tongzhai | Ph.D. | 2014 | Anticorrosive Organic/Inorganic Hybrid Coatings |
Gao | Xiang | Ph.D. | 2017 | Ultrasound Assisted Extrusion and Properties of Polycarbonate/Carbon Nanotubes Composites and Cast Films |
Garcia Buduen | Romny | M.S. | 2013 | Evaluation of the Role of Hydrodynamic Shear on Breakage of Thermally Conductive Particles during Compound Preparation |
Garcia-Ramirez | Rafael | M.S. | 1991 | The Effect of a Mobile Boundary on the Extrusion of Polymers |
Garza-Lopez | Tito | M.S. | 2000 | Ablation and Adhesion Behavior Evaluation of Polypropylene Backed Pressure Sensitive Adhesive Tapes Using the Excimer Laser |
Gautam | Keshav | M.S. | 1999 | Optoelectronic Studies on Novel Conjugate Polymer Systems |
Geng | Yan | M.S. | 2013 | Emulsion Polymerized Monodisperse Silica-Polymer Core-Shell Nanoparticles for Antireflective Coatings |
Gerrard | David | Ph.D. | 2000 | Dynamic and Kinematic Effects in the Friction and Wear of Rubber |
Getzie | Travis | Ph.D. | 2012 | Magneto-Optical and Rheological Behaviors of Oil-Based Ferrofluids and Magnetorheological Fluids |
Ghanem | Mahmoud | M.S. | 2004 | The Effect of Processing Conditions on the Structural Gradients Developed in Injection Molded Bacterial Poly (3Hydroxy Butyrate-Co-3Hydroxy Valerate) Parts |
Ghose Belcher | Sayata | Ph.D. | 2004 | Recycling of Polyurethane Rubber and Foam by the Application of High Power Ultrasound |
Ghosh | Monoj | Ph.D. | 2016 | Fabrication of Inorganic Oxide Nanofibers using Gas Jet Fiber Spinning Process and their Applications in Photocatalytic Oxidation |
Ghosh | Sudip | M.S. | 1994 | Crystallization Behavior and Processing-Structure-Property Relationship in Binary Blends of PPS |
Gintert | Michael | Ph.D. | 2007 | A Novel Approach to Obtain High Performance Layered Silicate Thermoset Polyimide Matrix Nanocomposites |
Glogovsky | Todd | M.S. | 1991 | A Model of Stress Softening for a Carbon Filled Rubber |
Gmerek | Michael | M.S. | 1993 | Shear-Induced Crystallization in Injection Molding of Thermoplastics: Modeling and Experiment |
Gomatam | Rajesh | Ph.D. | 2002 | Modeling Fatigue Behavior of Electronically Conductive Silver Filled Adhesive |
Gong | Ziyuan | M.S. | 2019 | Effect of Sodium Dodecyl Sulfate on the Structure and Rheological Properties of Pluronic F108 - Poly(acrylic acid) Coacervates |
Gotad | Pratik | Ph.D. | 2024 | Design of Porous Gel and Aerogel Media for Oil-Water Separation and Small Organic Molecule Adsorption |
Gowrishankar | Sunil | M.S. | 1999 | Stiffness and Vibrational Behavior and Design of Composite Cylindrical Helical Springs Manufactured using Filament Winding |
Graves | David | M.S. | 1998 | On-Line Measurements of Crystallization of Low Density Polyethylenes Using Integrated Fiber Optic Laser Raman Spectroscopy, Light Depolarization and Small Angle Laser Light Scattering Techniques |
Grolman | Danielle | Ph.D. | 2017 | Self-Organization and Controlled Spatial Distribution of Cellulosic Nanofillers in Polymer Thin Films |
Gu | Chang-Il | Ph.D. | 2000 | Reactive Blending of Treated Waste Rubber With Polyamides and Their Monomer |
Gu | Senlong | M.S. | 2013 | Effect of Polybenzoxazine on Properties of Shape-memory Polyurethanes with Glassy and Crystalline Soft Segments |
Gu | Senlong | Ph.D. | 2016 | Building Blocks and Their Effects on Polymer Aerogel Properties |
Gu | Zipeng | M.S. | 2018 | Emulsion Templated Polyimide Aerogel Foam and Hybrid Aerogel Foam as Absorbents for Oil Cleanup |
Guenthner | Andrew | Ph.D. | 2000 | Evaporation-Induced Solidification and Morphology Development in Polymer Fibers and Films |
Guha | Abhishek | M.S. | 2003 | Synthesis and Characterization of Polypropylene Microfibers Containing Carbon Nanofibers and Single Walled Carbon Nanotubes |
Guhathakurta | Soma | Ph.D. | 2009 | Anhydrous State Proton and Lithiium Ion Conducting Solid Polymer Electrolytes Based on Sulfonated Bisphenol-a-poly(Arylene Ethers) |
Gunes | Ibrahim Sedat | Ph.D. | 2009 | Analysis of Shape Memory Properties of Polyurethane Nanocomposites |
Gunes | Kaan | Ph.D. | 2009 | In-Situ Ultrasonic Compatibilization of Binary Blends of Flexible Chain Polyesters and Wholly Aromatic Liquid Crystalline Polymers |
Guo | Hao | M.S. | 2018 | Role of Chemical Surface Preference in Translational and Reorientational Nanoconfinement |
Guo | Jiao | Ph.D. | 2010 | Development of Ion Conductive Polymer Gel Electrolytes and Their Electrochemical and Electromechanical Behavior Studies |
Guo | Xiaoping | Ph.D. | 1999 | Crystallization, Microstructure, Residual Stresses and Birefringence in Injection Molding of Semicrystalline Polymer: Simulation and Experiment |
Guo | Yingmin | M.S. | 2016 | Continuous Ultrasonic Process for Devulcanization of Rubbers Suitable for Incorporation in New Tires |
Guo | Yuanhao | M.S. | 2013 | Reinforcement of Hydrogels by Nanofiber Network |
Guo | Yuanhao | Ph.D. | 2016 | Functional Polymer Film Roll-to-Roll Manufacturing by Field Assisted Alignment of Nanoparticles/Phases in Thickness "Z" Direction |
Guo | Yuelei | M.S. | 2018 | Investigation of Silicone Rubber Blends and Their Shape Memory Properties |
Guo | Yuewei | M.S. | 2021 | Variation in the Properties of Ionomers Synthesized by Ionic Functionalization Pre- and Post-Polymerization |
Gupta | Sahil | Ph.D. | 2014 | Structure-Property Relationships in Polymers for Dielectric Capacitors |
Guzman | Gustavo | Ph.D. | 2016 | Bimodal Amphiphilic Polymer Con etworks: Structure-Property Characterization, Processing and Applications |
Ha | Seung-Kyu | M.S. | 1997 | Continuous Polymerization and Copolymerization of Lauryl Lactam in a Modular Intermeshing Corotating Twin Screw Extruder |
Halthore | Ramprasad | M.S. | 1999 | Study on the Effect of Pigments on Mechanical Properties of Injection Molded Polypropylene |
Han | Min | M.S. | 1990 | Wall Slip of Rubber and Rubber Compounds: Influence of Materials of Construction and Additives |
Han | Peter | M.S. | 1991 | A Fundamental Study of the Rheology and Mold Filling of Sheet Molding Compounds |
Han | Peter | Ph.D. | 1995 | A Basic Study of the Rheological Properties of Structurally-Complex Polymer Systems Including Thermoplastic Elastomers |
Hasheminasab | Sayyed Abed | M.S. | 2020 | Bismaleimide Methacrylated Polyimides-Polyester Hybrid UV-Curable Powder Coating |
Hassan | Mohamed | Ph.D. | 2004 | Novel True Stress-True Strain-Birefringence Measurement Systems for Real Time Measurement During Biaxial Stretching and Heat Setting Polymer Films "Application on PET Films |
Havet | Guy | Ph.D. | 2000 | Experimental Investigation and Modeling of the Rheology of Silica-Polystyrene Mixtures |
Hayirlioglu | Arzu | Ph.D. | 2014 | Directed Assembly of Block Copolymer Films via Surface Energy Tunable Elastomers |
He | Chunxia | M.S. | 1999 | Studies of Flows of Polyisobutylene in Long Circular and Square Dies |
He | Fang | M.S. | 1997 | Fatigue and Stress Relaxation Behavior of High-Density Polyethylene |
He | Lijuan | M.S. | 1997 | Viscoelastic Behavior of Narrow Molecular Weight Distributed Polybutadienes |
He | Ruixuan | Ph.D. | 2016 | Studies on Ionic Conductivity and Electrochemical Stability of Plasticized Photopolymerized Polymer Electrolyte Membranes for Solid State Lithium Ion Batteries |
He | Zhouying | Ph.D. | 2015 | Organic/Inorganic Hybrid Coatings for Anticorrosion |
Hill Marko | Meagan | M.S. | 2005 | Adding Value to Recycled Polyethylene Through the Addition of Multi-Scale Reinforcements |
Hindi | Majid | Ph.D. | 1989 | Mechanochemical Fatigue and Heat Build-Up in Elastomers |
Hindi | Rick | M.S. | 2001 | Thermomechanical Analysis of a 2 Ply Composite Laminate Test: Investigation of Damage Evolution from Socketing to Bridging |
Hinojosa-Falcon | Luis | M.S. | 2003 | Plasticization and Stabilization Effects on the Mechanical and Thermal Properties of Plasticized PVC Nanocomposites |
Hong | Chang Kook | Ph.D. | 2001 | The Application of Powerful Ultrasound to Devulcanization of Rubbers and Compatibilization of Polymer Blends |
Hong | Chang Min | Ph.D. | 2005 | Investigation of Shear-Induced Migration of Filler Particles in Molding Flows |
Hong | Myeong-Ho | Ph.D. | 2004 | Structure Development of Cyclopolyolefins and Polystyrenes in Melt Spinning and Film Stretching Process |
Hong | Myung-Hyuk | Ph.D. | 1997 | Theoretical and Experimental Studies in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
Howard | Faith | M.S. | 2001 | Reactive Dispersion of Waste Ground Rubber With Polyolefin |
Hoy | Thomas | M.S. | 2016 | Optimizing Solvents for a Quinary System |
Hsiung | Chang-Meng | Ph.D. | 1990 | Processing-Structure-Property Relationship and Simulation of Structure Gradients in Injection Molding of Semi-Crystalline Aromatic Polycondensates |
Hu | Benfei | M.S. | 1992 | Theoretical and Experimental Study of Internal Mixers |
Hu | Peng | M.S. | 1996 | Racheting of Polyethylene Pipe |
Hu | Yongan | Ph.D. | 2023 | Study of Urethane Methacrylates in Acrylic Latexes: The Effect of Bulky Alkyl Terminal Groups and Self-Healing Behavior |
Hu | Yongan | M.S. | 2019 | Influences of Monomer Hydrophobicity on Secondary Nucleation in Emulsion Polymerization |
Hu | Yupeng | M.S. | 2015 | Electrospun Nanofibers for Programmable Drug Delivery System Sequentially Targeting Inflammation and Infection |
Huang | Chongwen | Ph.D. | 2016 | Rheology of Oligomeric Sulfonated Polystryene Ionomers |
Huang | Keyuan | Ph.D. | 2015 | Decrosslinking of Crosslinked Polyethylene via Ultrasonically Aided Extrusion |
Huang | Rundong | M.S. | 2020 | Tribological Behavior of Ionic Liquid Nanoconfined between Hydrophilic and Hydrophobic Surfaces |
Huang | Shifeng | M.S. | 2019 | Investigation of Interfacial Dynamics Between Active Surfaces Ranging from Soft Biomacromolecules to Hard Inorganic Surfaces |
Huang | Shuyue | M.S. | 2018 | Coacervation and Phase Behavior of Aqueous Solutions of Oppositely Charged Polyelectrolytes |
Huang | Tsang-Min | Ph.D. | 2010 | Phase Equilibria of Mesophase Transitions in Binary Liquid Crystal Mixtures Involving Induced Ordered Phases |
Huang | Wenyi | Ph.D. | 2006 | Synthesis, Characterization and Rheology of Functional and Heterocyclic Liquid-Crystalline Polymers |
Huang | Yeong-Hua | Ph.D. | 1991 | One- and Two-Dimensional Channel Flow of a Viscoelastic Plastic Material: Simulation and Experimentation |
Huang | Yiyun | M.S. | 1995 | Self-Reinforced Prepregs, Laminates and Injection Moldings of HDPE/LCP Blends |
Huang | Zixu | M.S. | 2018 | Flexible Perovskite Hybrid Solar Cells Through Organic Salt Treated Conducting Polymer as the Transparent Electrode |
Huarng | Jyh-Chiarng | M.S. | 1987 | Miscibility and Morphology Studies for Ternary Blends |
Hung | Jui-Hsiang | Ph.D. | 2018 | Efficient Computational Strategies Enabling Insights into the Glass Transition |
Huq | Abul | Ph.D. | 2015 | Interfacial and Solvent Processing Control of Phenyl-C61-Butyric Acid Methyl Ester (PCBM) Incorporated Polymer Thin Films |
Hutjens | Charles | M.S. | 2013 | Morphology Control for Model Block Copolymer/Nanoparticle Thin Film Nano-Electronic Devices on Conductive Substrates |
Ihm | Dong Joon | Ph.D. | 1994 | Compatibilization, Morphology and Mechanical Properties of Polyethylene Terephthalate/Polyethylene Blends |
Isayeva | Irada | M.S. | 1997 | Studies of Miscibility, Crystallization and Structure-Property Relation of Blends of Two Semicrystalline Polymers: Poly(vinylidene fluoride) and Poly(1.4-butylene adipate) |
Iskander | Suzette | M.S. | 1994 | Blends of Copolyester Thermoplastic Elastomer with Nitrile Rubber |
Jadhav | Sainath | Ph.D. | 2022 | Development of an Epoxy Mixed-Matrix Composite System Using an Ionic Liquid-Based Coordination Polymer |
Jaeger | Tamara | Ph.D. | 2020 | Insights into Physical Aging of Thermally-quenched and Solvent-cast Polymers from Molecular Dynamics Simulation |
Jain | Sachin | M.S. | 2000 | Nanocomposites of High Performance Thermoplastic Polymers Using Epoxy as Processing Aid |
Jarukumjorn | Kasama | Ph.D. | 1999 | On-Line Monitoring of Grafting Monomers onto Low Density Polyethylene in a Model Twin Screw Extruder by Fiber Optic Raman Spectroscopy |
Javadi | Ali | Ph.D. | 2017 | Methacrylated Poly(ethylene Glycol)s as Precursors for Superplasticizers and UV-Curable Electrical Contact Stabilization Materials |
Jenkins | John | M.S. | 2007 | Ultrasonic Decrosslinking of Crosslinked Polyethylene |
Jeong | Jae-Hyeuk | Ph.D. | 2003 | A Study of Complex Channel Flows of Polymer Melts |
Jeong | Jisoo | Ph.D. | 2023 | Sulfur Cathodes and Silicon Anodes for High-Energy Density and High-Power Density Applications: The Way to the Next Generation Batteries |
Jeung | Soondeuk | Ph.D. | 2005 | The Studies of Polyurethane and Polyethylene Oxide Electrolites with Various Salts |
Jha | Kshitij | Ph.D. | 2012 | Polarization and Self-Assembly at Metal-Organic Interfaces: Models and Molecular-Level Processes |
Ji | Shuxin | M.S. | 2017 | Electrostatically Active Aerogels for Air Filtration and Synthesis of Syndiotatic Polystyrene Aerogel Microparticles |
Ji | Xiang | M.S. | 2016 | The Influence of Assembly pH and Clay Inclusion on the Actuation of Polyelectrolyte Multilayers |
Jian | Pei-Zhen | Ph.D. | 2019 | Fabrication of Solvent and Temperature Sensitive Polymer Bilayer Bending Actuators |
Jiang | Fanhui | M.S. | 2014 | Real-Time Optical and Mechano-Optical Studies during Drying and Uniaxial Stretching of Polyetherimide Films from Solution |
Jiang | Haowei | M.S. | 2018 | Time-Salt Superposition in Polyelectrolyte Complexes and Enhanced Mechanical Properties of Three-Dimensional Printing by Core-Shell Structured Thermoplastics |
Jiang | Qibo | Ph.D. | 2008 | Modeling Flow, Melting, Solids Conveying and Global Behavior in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
Jimenez | Guillermo | Ph.D. | 2007 | Characterization of PMMA and TPU Carbon Nanofiber Composites Produced by Chaotic Mixing |
Jin | Chenxi | M.S. | 2020 | Fabrication of Non-Spherical Polyimide Aerogel Microparticles |
Jin | Weize | M.S. | 2015 | Relative Alignment of CZA (Cold Zone Anneal) Polymerm in Nano Imprinted Films |
Joo | Minjung | Ph.D. | 2016 | Silane Terminated Macromonomers with Nanoparticles and Surface Segregation of Fluorinated Moieties |
Joshi | Prashant | Ph.D. | 1999 | Viscoelastic Modeling of Filled, Crosslinked Rubbers |
Jung | Chang Do | Ph.D. | 2005 | Synthesis of Thermoplastic Polyurethanes and Polyurethane Nanocomposites Under Chaotic Mixing Conditions |
Jung | Ho-Chul | Ph.D. | 2004 | Investigation of Melting in Modular Intermeshing Co-Rotating Twin Extruder |
Kadota | Masanori | M.S. | 1997 | The Evolution of Structural Hierarchy in Co-Injection Molded Polystyrene Polypropylene Polymer Pairs |
Kaewpanya Magaraphan | Rathanawan | M.S. | 1993 | Adhesion of High Density Polyethylene and Polypropylene |
Kalan | Steven | M.S. | 2011 | Surface Modification of Silicon Through Thermal Annealing and Rinsing of Solvent Cast Polystyrene Films |
Kalkan | Zehra | Ph.D. | 2006 | Generation of Advanced Polyamide-6,6 Nanocomposites via Interfacial Polycondensation |
Kalvani | Bimal | M.S. | 1991 | An Investigaton of EMI Shielding Composites Made By Incorporating Low-Melting Point Metals into Thermoplastics |
Kamruzzaman | Mohammad | M.S. | 2003 | An Investigation of Harmonic Properties of Carbon Nanotubes and Their Hexagonal Arrays |
Kang | Ho-Jong | Ph.D. | 1989 | Structure Development and Dynamics in Double Bubble Tubular Film Processing |
Kanuga | Karnav | Ph.D. | 2006 | A Fundamental Study on the Non-Linear Mechano-Optical Behavior of Polyethylene Naphthalate, Its Blends with Polyetherimide and its Nanocomposites |
Karmarkar | Uday | M.S. | 2000 | Mechanical Adhesion Analysis of Multi-Stepped Double Scarf Joints with Void and Disbond Effects |
Kasbe | Pratik | Ph.D. | 2024 | Two-Dimensional (2D) Hybrid Nanomaterials as Functional Nanocoating and Solid Lubricants |
Ke | Linping | Ph.D. | 2010 | Dispersion Characteristics of Nanocomposites Based on Functionalized Block Copolymers |
Keawwattana | Wirunya | Ph.D. | 2002 | Phase Behavior, Crystallization and Morphological Development in Blends of Polypropylene (PP) Isomers and Poly (Ethylene-Octene) Copolymer |
Keuchel | Kenneth | M.S. | 1994 | Instrumented Spin Welding of Polypropylene |
Keum | Jongmin | Ph.D. | 2004 | Engineering Analysis of Devolatilization and Reactive Processing |
Khanolkar | Amit | M.S. | 2000 | Effect of Interfacial Weight Loss by Silver Migration on the Pull-Out Strength of Silver Wire Embedded in an Adhesive Matrix |
Kiehl | Christopher | M.S. | 1992 | Nondestructive In-Line Monitoring of the Polymerization of Methyl Methacrylate with Ultrasound |
Kim | Byong-Jun | Ph.D. | 2002 | Reactive Extrusion of E-Caprolactone Polymers and Application of Poly(Lauryl-B-Caprolactone) as a Compatibilizing Agent in Blends Containing Poly(Vinyl Chloride) |
Kim | Byoungjoo | Ph.D. | 1996 | Studies of Thermal/Peroxide Induced Degradation and Maleation of Polypropylene in a Modular Intermeshing Twin Screw Extruder |
Kim | Do | Ph.D. | 2003 | Phase Equilibria and Dynamics of Thermally Induced and Polymerization-Induced Phase Separations in Main-Chain Liquid Crystalline Polymer Mixtures |
Kim | Dong-Ok | Ph.D. | 2000 | Effect of Pendent Side Groups on the Rheology, Mesophase Structure, Molecular Packing, and Conformational Properties of Thermotropic Liquid-Crystalline Polymers |
Kim | Eung Gun | M.S. | 1991 | Plastic Effects in Peeling Polyethylene Films |
Kim | Eung Kyu | Ph.D. | 2000 | Investigation of Transient Flow and Element Analysis in Modular Intermeshing Co-Rotating Twin Screw Extruders |
Kim | Hyunjung | M.S. | 1997 | Mechanical Behavior and Adhesion of Block Copolymer/Polystyrene Pairs |
Kim | In | Ph.D. | 2004 | Development of New Generation of Copolymers via Reactive Extrusion in a Twin Screw Extruder and Application in Various PVC Blends |
Kim | Jeong-Cheol | Ph.D. | 1995 | The Influence of Processing History on Structural Characteristics of Poly(ethylene 2,6 naphthalene dicarboxylate) and Poly(ether imide) Blends |
Kim | Jin Kuk | Ph.D. | 1990 | Analysis of Flow and Mixing in an Internal Mixer with Different Rotor Designs |
Kim | Jongdae | Ph.D. | 2004 | A Study of Structure Formation on PET, PBT, and PS Surfaces by Excimer Laser Ablation |
Kim | Kwang-Jea | Ph.D. | 1998 | Rheology, Processing, and Characterization of Isotropic, Anisotropic, and Mixed Particle Filled Polymer System |
Kim | Kyuk Hyun | Ph.D. | 2004 | Flow Induced Crystallization and Birefringence Development of Semicrystalline Polymers in Injection Molding and Fiber Spinning Process |
Kim | Myung Hwan | Ph.D. | 1990 | Theoretical and Experimental Studies of Flow Behavior in Modular Non-Intermeshing Counter-Rotating Twin Screw Extruders |
Kim | Nam Hyung | Ph.D. | 2009 | Injection-Compression and Co-Injection Moldings of Amorphous Polymers: Viscoelastic Simulation and Experiment |
Kim | Namil | Ph.D. | 2010 | Photoisomerization- and Photopolymerization-induced Phase Trnasitions in Mixtures of Photoresponsive Chromophores and Reactive Mesogens |
Kim | Pan Jong | Ph.D. | 1993 | Flow Visualization and Study of Chemical Reactions in a Modular Intermeshing Co-Rotating Twin Screw Extruder |
Kim | Pan Soo | Ph.D. | 1996 | Flow and Mixing Characteristics in an Intermeshing Counter-Rotating Rotor Internal Mixer |
Kim | Seok-Ho | Ph.D. | 1998 | Continuous Ultrasonic Devulcanization of Sulfur Cured SBR Vulcanizates |
Kim | Sung Jun | Ph.D. | 2016 | Monolithic Aerogels and Their Applications in Airborne Nanoparticle Filtration |
Kim | Won-Ho | Ph.D. | 1992 | Local Deformation of Rubber Seals |
Kim | Won-Kook | M.S. | 1993 | Phase Behavior and Dynamics of Phase Separation in a Mixture of Polystyrene and Liquid Crystal |
Kim | Younghoon | Ph.D. | 2004 | A Study of Polymer/Clay Nanocomposite Formation by Melt-Intercalation Process |
Ko | Che-Chian | Ph.D. | 1994 | Phase Separation and Chemical Reactions in Blends of Polycarbonate with Polymethyl Methacrylate Isomers |
Ko | Dong-Hwi | M.S. | 1991 | Enhancement of Electrical Properities of Uniaxially and Biaxially Processed Poly-p-phenylene Sulfide Film |
Kochar | Lalit Singh | M.S. | 1986 | High Pressure Vulcanization of Elastomers |
Konishi | Yuma | M.S. | 2004 | Nanoparticle Induced Carbon Black Network Self-Assembly and Structural Hierarchy Development in Injection-Molded Conductive Composites |
Koombhongse | Piyawit | Ph.D. | 2001 | Phase Behavior and Morphology of SAN/PMMA Under High Flow Rates |
Kothari Suri | Shipra | M.S. | 2000 | Vulcanization Induced Phase Separation in Blends of Syndiotactic Polypropylene and Metallocene Catalysed Ethylene Propylene Diene Terpolymer |
Kumar | Rishi | Ph.D. | 2010 | Manufacturing of Polymer Nanocomposites Containing Carbon Nanotubes and Carbon Nanofibers Using Ultrasound Assisted Extrusion Process |
Kumar | Sumeet | M.S. | 1998 | Selective Use of Rubber Toughening to Optimize Lap Joint Strength |
Kuttappa | Sanjay | M.S. | 1994 | Static and Dynamic Characteristics of Rubber Compounds |
Kuznicki | Jason | M.S. | 2005 | Water Uptake and Fracture Behavior of Epoxy/Clay Nanocomposites Used for Bonding Granite |
Kwa | Teik Lim | M.S. | 2006 | Development of On-Line True Stress-Strain-Electrical Conductivity Uniaxial Tensile Stretching Measurement System & its Utility in Thermo-Mechano-Electrical Behavior of Carbon Black (CB) Filled PolyLactic Acid (PLA), Binary & its Nanoclay (NC) Ternary Nano |
Kwak | Seung-Yeop | M.S. | 1989 | PVC-Plasticizer Interaction in Plastisol Processing: Effect of the Homologous Series of Plasticizers on Gelation and Fusion Behavior |
Kwak | Seung-Yeop | Ph.D. | 1992 | Investigation of Morphology on Progress of Mixing PVC With Different Polymers: Structure and Mechanical Behavior After Mixing |
Kwon | Keehae | Ph.D. | 2005 | Anisotropic Shrinkage in Injection Moldings of Semicrystalline and Amorphous Polymers: Simulation and Experiment |
Kwon | Youngdon | Ph.D. | 1994 | Studies of Viscoelastic Constitutive Equations and Some Flow Effects for Concentrated Polymeric Fluids |
Kye | Daniel | Ph.D. | 2022 | Towards Designing of Polymeric Latent Humidity Sensor |
Kye | Hyoungsan | Ph.D. | 1995 | Continuous Polymerization of Caprolactam and Reactive Blending in a Modular Intermeshing Corotating Twin Screw Extruder Integrated with Polyamide Fiber Melt Spinning |
Lai | Sun-Mou | Ph.D. | 1993 | Effect of Interfacial Bonding on the Strength of Adhesion |
Lai | Tzu-Yu | Ph.D. | 2020 | Phase Behavior Study and Thermoresponsive Bilayer Fabrication of Organogels |
Lalgudi | Basker | M.S. | 2000 | An Experimental Investigation of Rheology and Chemorheology of Styrene Butadiene Rubber (SBR) and Natural Rubber (NR) |
Lang | Ryan | M.S. | 2013 | Nanoconfinement Effects on the Glass Transition: A Study of Nanolayered and Freestanding Coarse-Grain Polymer Films |
Laokijcharoen | Pasaree | Ph.D. | 2000 | The Phase Morphology of Blends of Natural Rubber with Crystalline Hydrocarbon Plastics |
Lapshin | Sergey | Ph.D. | 2006 | Experimental and Theoretical Study of Polyolefin-Clay Nanocomposites Prepared Using High Power Ultrasound |
Larentzos Rubino | Evangelia | M.S. | 2000 | The Effect of Ground Silica Fillers on the Processing Properties of Silicone Compounds |
Lazarenko | Daria | Ph.D. | 2022 | Understanding Bulk and Interfacial Behavior of Ionic Liquids-Containing Fluids Using Predictive Computational Tools |
Lee | Byoung Jo | Ph.D. | 2009 | Nucleating Agent-Assisted Preparation of Polypropylene (PP)/Polyhedral Oligomeric Silsesquioxane (POSS) Nanocomposites and Their Characterization |
Lee | Byung-Hwa | Ph.D. | 2001 | Experimental and Theoretical Studies of Reactive Extrusion Process in Twin Screw Extruders: Formation of Polycaprolactam and Block Copolymers |
Lee | Dong Jae | Ph.D. | 1998 | Experimental and Theoretical Study of Sandwich Injection Molding Process |
Lee | Eon-Seok | Ph.D. | 1997 | Influence of Fluoropolymers on the Extrusion Characteristics of Thermoplasltic Melts |
Lee | Hak-Soo | Ph.D. | 1991 | Thermodynamics and Kinetics of Phase Separation in Functional Prepolymer Mixtures and Networks |
Lee | Hyunsang | Ph.D. | 2024 | Development of Polyoxide-Co-Polysulfide Electrolyte for High Specific Capacity Lithium Metal Batteries and Supercapacitors |
Lee | Jaehyung | Ph.D. | 1999 | Dynamics of Polymerization Induced Phase Separation in Reactive Polymer Blends |
Lee | Je-Kyun | Ph.D. | 1998 | Morphology Evolution in Polymer Blend During Compounding and Subsequent Processing |
Lee | Jehoon | Ph.D. | 2017 | Synthesis, Characterization, and Applications of the Low Cross-Link Density Poly Acrylate Elastomers using Direct Reversible Addition Fragmentation Chain Transfer Cross-Linker |
Lee | Jeong | Ph.D. | 1991 | Fundamental Properties and Structure Development in Solid State Processed Vinylidene Fluoride/Trifluorethylene Copolymers |
Lee | Jeongwoo | Ph.D. | 2015 | Porous Carbon/TIO2 Composites as an Anode of Sodium Ion Batteries |
Lee | Keun Yong | Ph.D. | 2005 | Structure and Properties of Polymer Blend Nanocomposites |
Lee | Kyung Min | Ph.D. | 2002 | Phase Transition, Rheology, and Morphology of Block Copolymers and Side-Chain Liquid-Crystalline Polymers |
Lee | Nam Seok | M.S. | 1990 | Miscibility of Blends of CIS-1,4 Polyisoprene-Butadiene-Styrene Copolymers and Polybutadiene |
Lee | Seung Wook | M.S. | 1992 | Fundamental Studies on Crystallization Kinetics and Necking Behavior of Polyethylene 2,6-Naphthalate |
Lee | Shi-Ho | Ph.D. | 1996 | Influence of Viscosity Ration on Mixing and Melting of Immiscible Polymer Blends in a Modular Intermeshing Corotating Twin Screw Extruder |
Lee | Sung-Duk | M.S. | 1989 | Critical Comparison of Methods of Measurement of Carbon Black Dispersion in Rubber Compounds |
Lewis | Elizabeth | Ph.D. | 2020 | Aging of Thin Glassy Polymers Probed by Ellipsometry and Mechanics |
Lewis | Ivor | M.S. | 1992 | Rheological and Process/Mechanical Properties of Estaloc Polyurethane |
Lewis | Todd | Ph.D. | 2014 | Carbon Nanotube Composites Prepared by Ultrasonically Assisted Twin Screw Extrusion |
Li | Bohao | M.S. | 2013 | Room Temperature Processed Molybdenum Oxide Thin Film as a Hole Extraction Layer for Polymer Photovoltaic Cells |
Li | Chao | M.S. | 2016 | Tunable West Adhesion in Polyelectrolyte Multilayers |
Li | Cheng | M.S. | 2018 | Synthesis of Ionically Crosslinked Polyelectrolytes by Homopolymerization of an Ion-Pair Comonomer |
Li | Chengtao | Ph.D. | 2003 | Two Component Co-Injection and Transfer Molding and Gas-Assisted Injection Molding of Polymers: Simulation and Experiment |
Li | Guo | M.S. | 1995 | Kinetics of Quiescent and Shear-Induced Crystallization: Molecular Weight Effects |
Li | Hang | M.S. | 1999 | Structure Development in Melt Spinning Filaments and Biaxially Stretched Films from Poly(Butylene Terephthalate) Based TPE's |
Li | Jiaxi | M.S. | 2014 | Modified Soybean Oil-Extended SBR Compounds and Vulcanizates |
Li | Jiaxi | Ph.D. | 2017 | Toward Replacement of Petroleum Plasticizer by Modified Soybean Oil in Rubbers |
Li | Jingyu | M.S. | 2015 | A Novel µ-Fluidic Channel Assisted Encapsulation Technique for Layer-by-Layer Polymer Nano- and Microcarrier Fabrication |
Li | Jiaxi | M.S. | 2014 | Modified Soybean Oil-Extended SBR Compounds and Vulcanizates |
Li | Li Li | M.S. | 1995 | Effects of Particulate Filler Type, Size and Surface Treatment on Rheological Behavior of Filled Rubber Compounds |
Li | Mingzhe | M.S. | 2014 | Mechanical Properties and Swelling Behavior of BPEI-Metal Ion/PAA Polyelectrolyte Multilayer Films |
Li | Ran | M.S. | 2020 | Research on Highly Conductive Solid-State Electrolyte Membrane and New Electrode Binder (FLEP 60) in Polymer Electrolyte Lithium Ion Half Cells |
Li | Sinan | Ph.D. | 2007 | Design and Construction of Nanoarchitectural Metal Derivatives-Carbon Nanotype Hybrids |
Li | Tong | M.S. | 2015 | Terrace Phenomenon of Block Copolymers (BCPs) via Cold Zone Annealing (CZA) |
Li | Wenhao | M.S. | 2019 | Preparation of Janus Nanoparticles and its Application in Oil Industry |
Li | Wenqi | M.S. | 2014 | Orderly Perforation of Polyester Films by Excimer Laser |
Li | Xindi | M.S. | 2018 | Modification of Sulfonated Syndiotactic Polystyrene Aerogels Through Ionic Interactions |
Li | Yifan | M.S. | 2016 | High Performance Perovskite Hybrid Solar Cell via Interfacial Engineering |
Li | Zhehui | M.S. | 2013 | Barium Oxide as an Intermediate Layer for Polymer Tandem Solar Cell |
Li | Ziyan | Ph.D. | 2024 | Fabrication of SEBS/Wax Bilayer Actuators Through Fused Filament Fabrication (FFF) 3D Printing |
Li | Ziyan | M.S. | 2020 | High Temperature Resistant Polyimide for UV Curable Powder Coatings |
Liang | Songxin | M.S. | 1998 | Phase Behavior in Mixtures of Smectic-LC/polymer, Nematic-LC/polymer and Smetic-LC/side-on side-chain Liquid Crystalline Polymer |
Liang | Tian | M.S. | 2013 | Continuous Devulcanization of Ground Tire Rubber of Different Particle Sizes Using an Ultrasonic Twin-Screw Extruder |
Liang | Tian | Ph.D. | 2017 | Structure and Properties of Rubbers and their Blends Manufactured with Ultrasonically Assisted Extrusion |
Liang | Yi Cheng | Ph.D. | 2000 | Experimental and Theoretical Study of Self-Reinforced Polypropylene/LCP Blends |
Lim | Dong-Soo | Ph.D. | 1991 | Miscibility and Dynamic Behavior of Phase Decomposition in Binary Mixtures of Polycarbonate and Poly(methyl Methacrylate) Stereoisomers |
Lim | Soon-Ho | Ph.D. | 1991 | Particle Orientation Development and Directional Growth Phenomena in Processed Filled Thermoplastic Compounds |
Lin | Che-Kuan | Ph.D. | 2022 | Inhibition of Free Radical Cured Thermosetting Acrylic Coatings |
Lin | Heng | M.S. | 2003 | The Effects of High Intensity Ultrasonic Waves on Polypropylene, Polyamide 6 and Their Blends |
Lin | Kehua | M.S. | 2016 | Ellipsomery Measurements of Chemical Reactions and Diffusion Processes in Polymer Films |
Lin | Tsui-Hsun | Ph.D. | 2009 | Birefringence, Anisotropic Shrinkage and Luminance in Injection Molded Light-Guide Plate: Modeling and Experiment |
Lin | Tzu-Jen | Ph.D. | 2013 | Force Field Parameters, Molecular Models, and Adsorptions of Biomolecules on Hydroxyapatite at Aqueous Interfaces |
Lin | Wan-Hua | M.S. | 2017 | Cellulose Aerogel Monoliths and Microparticles and their Applications in Drug Delivery System |
Ling | Zichen | M.S. | 2019 | Ion Effects on Self-Healing Poly(acrylic acid) and Poly(methacrylic) Acid Gels |
Lingel | Clinten | Ph.D. | 2024 | The Effects of Pressurized Methane on the Surface Energy of Lubricating Oil and PTFE and PEEK Sealing Materials |
Lipowski | Brian | M.S. | 2014 | Phase Behavior of 12-Hydroxystearic Acid Gels |
Liu | Chang | M.S. | 2015 | Polyaniline/Graphene Based Symmetric and Asymmetric Solid-State Supercapacitors |
Liu | Chang | M.S. | 2014 | Effect of Polymer Molecular Weight, Binary Processing Additives, Two-Dimensional Polymer on Efficiency of Polymer Solar Cells |
Liu | Chang | Ph.D. | 2017 | High Performance Solution-processed Perovskite Hybrid Photovoltaics: Solar Cells and Photodetectors |
Liu | Chengjun | M.S. | 2000 | Chemical and Viscoelastic Effects on Electrical Conduction by Emeraldine Salt in Powder and Composite Adhesive Forms |
Liu | Dan | M.S. | 2000 | Mixing Silica and Other Fillers into Elastomers in NEX-T Continuous Mixer |
Liu | Hua | Ph.D. | 2013 | Transport Mechanisms and Surface Properties Study on Polymer-based Solar Cells |
Liu | Jieruo | M.S. | 2013 | Manufacturing of Polypropylene (PP)/ Ground Tire Rubber (GTR) Thermoplastic Elastomers Using Ultrasonically Aided Extrusion |
Liu | Jung-Liang | Ph.D. | 1992 | Does Gel in Nitrile Rubber Affect the Properties of its Blend with Polyvinylchloride? A Fundamental investigation on the Tensile Property, Tear Resistance and Fracture Toughness |
Liu | Ruofan | M.S. | 2013 | Assessment of Composite Railroad Tie Cracking |
Liu | Ruofan | Ph.D. | 2018 | A Novel Methodology for Durability Assessment of Rubber Materials |
Liu | Shan | Ph.D. | 2024 | Advanced Manufacturing with Engineered Living Materials for Sustainable Biocomposites |
Liu | Xiangyu | M.S. | 2016 | Highly Ordered Phase-separated PS/PMMA Blend Thin Films Structures via Capillary Force Lithography |
Liu | Xiaoxiao | M.S. | 2015 | UV Laser Treatment of Tire Reinforcing Fibers for Improved Adhesion to Rubber |
Liu | Xilan | Ph.D. | 2013 | Polymer Photodetectors: Device Structure, Interlayer and Physics |
Liu | Yanghe | M.S. | 2021 | All Solid-State Supercapacitors with Novel Perovskite Electrolytes |
Liu | Yawen | M.S. | 2018 | Facile Fabrication of Functional Slippery Polydimethylsiloxane (PDMS) Elastomer |
Liu | Yuqing | Ph.D. | 2011 | Synthesis and Characterization of Well-Defined, Amphiphilic, Ionic Copolymers |
Lo | Yi Ting | M.S. | 2019 | Synthesis and Characterization of Deep Eutectic Solvents (DES) with Multifunctional Building Blocks |
Longanecker | Melanie | Ph.D. | 2017 | Controlling the Microstructure and Kinetics of Block Copolymer Self-Assembly by Direct Immersion Annealing |
Lopez-Gonzalez | Francisco | M.S. | 1998 | Rheology, Curing Kinetics and Dielectric Analysis of Polymer Concretes |
Lopez Hallman | Raymond | Ph.D. | 2024 | Enhancing Energy Storage in the Solid Polymer Electrolyte within Li-Ion Batteries and Li-S Batteries |
Lu | Hui | M.S. | 2001 | The Influence of Excimer Laser Irradiation on the Morphology, Ablation Rate, Thermal Properties, and Ultrasonic Welding Strength of Thermoplastic Polymers |
Lu | Weijun | M.S. | 2000 | Extrusion Characterization and Melting Mechanism of Thermoplastic Elastomer and Thermoplastics |
Lu | Xiaoxu | M.S. | 2016 | A Facile Method to Fabricate Versatile Janus Nanoparticles |
Lu | M.S. | 2013 | Controlled Release of Cyclosporine A from Hydrophobically-Modified Hydrogels | |
Luo | Tengli | M.S. | 1997 | Rubber/Plastic Blends Based on Ultrasonically Devulcanized Ground Rubber Tire |
Luo | Xiongyu | M.S. | 2022 | Polymer/Metal Oxide Hybrid Nanostructures from Bottom-up Synthesis and Top-down Nanofabrication |
Luo | Yan | M.S. | 2014 | Nanoporous Block Copolymer Membranes for Separation and Filtration |
Lyu | Min-Young | Ph.D. | 1997 | Theoretical and Experimental Studies of a Buss Kneader |
Ma | Jianxing | M.S. | 2016 | Towards 3D Printing of Thermoplastic Shape Memory Polymers |
Ma | Yubing | M.S. | 2016 | Contraction of Weak Polyelectrolyte Multilayers in Response to Organic Solvents |
Ma | Zhihao | M.S. | 2019 | Novel Materials as Electrode and Electrolyte for All-Solid-State Supercapacitors |
McClanahan | Eric | Ph.D. | 2017 | Modification and Enhancement of Epoxide Coatings via Elastomeric Polysulfides, Self-Assembled Nanophase Particles, Functional Sol-Gels, and Anti-Corrosion Additives |
Mackura | Mark | M.S. | 2013 | Nano-confinement Effects on the Glass Transition of a Coarse-grained Polymer Melt |
Madan | Sanjeev | Ph.D. | 1989 | Plastic Deformation and Recovery of Semi-Crystalline Polymers |
Maffei | Mario | M.S. | 2006 | Characterization of Foaming Phenomena of Polypropylene Filled with Azodicarbonamide and Silica |
Mahanth | Satishkumar | M.S. | 1993 | Processing-Structure-Property Relationships in Melt Spun Poly (vinylidene flouride)/ Poly(methyl methacrylate) Blends |
Mangalara | Jayachandra Hari | Ph.D. | 2017 | Control of Polymer Glass Formation Behaviour using Molecular Diluents and Dynamics Interfaces |
Mao | Jingyi | M.S. | 2019 | Study of Solute Uptake in Polyelectrolyte Coacervate: Influence of Phase Behavior and Chemical Crosslinking to Produce Stable Encapsulating Drops |
Marin Angel | Juan | Ph.D. | 2021 | Development of Ion-Containing Polymers and Study of Their Molecular, Mechanical, and Flexoelectric Properties |
Marquina | Edgar | M.S. | 2010 | Use of Dynamic Mechanical Testing, EACS and SEM Image Analysis to Study the Properties of Polypropylene/Calcium Carbonate Nanocomposites |
Martins | Carla | Ph.D. | 2004 | Mechano Optical Behavior of PET and PEN Under Linear and Programmed Deformation Rate Profiles |
Matkar | Rushikesh | Ph.D. | 2007 | Phase Diagrams and Kinetics of Solid-Liquid Phase Transitions in Crystalline Polymer Blends |
Mawhinney | Kaitlyn | Ph.D. | 2020 | Design and Characterization of Emulsion-templated Macroporous-Mesoporous Polyurea Gels and Aerogels |
Meenakshisundaram | Venkatesh | Ph.D. | 2018 | Elucidating Physics of Sequence-Specific Polymers and the Glass Transition via Evolutionary Computational Design |
Mehr | Hamideh | Ph.D. | 2019 | Application of High-Performance Polyimides in Additive Manufacturing and Powder Coating |
Mehta | Atul | M.S. | 1990 | Self-Reinforced Fiber Composites of PEEK and Thermotropic Liquid Crystalline Polymer |
Mehta | Rujul | Ph.D. | 2003 | Spatio-Temporal Growth of Polymer Single Crystals, Hedites and Spherulites During Isothermal Crystallization |
Meksupha | Pawiga | M.S. | 1996 | Miscibility Study of Halogen Flame Retardant Polymer Blends |
Melnikov | Alexei | Ph.D. | 2010 | Damage and Fatigue in Cross-linked Rubbers |
Meng | Lei | Ph.D. | 2015 | Organic/Inorganic Hybrid Coatings for Anticorrosion |
Meng | Scott | Ph.D. | 2004 | Phase Equilibria and Morphology Development in Liquid Crystal/Photo-Curable Monomer Mixtures Undergoing Pattern Photo-Polymerization |
Meng | Tianyu | M.S. | 2015 | E-beam Evaporated TiOx as the Electron Transfer Layer for Perovskite Hybrid Solar Cells |
Merling | Weston | Ph.D. | 2018 | Investigating the Effects of Interfacial Features on Nanoscale Confined Polymer Systems |
Merriman | Stephen | Ph.D. | 2024 | Characterization of Polymer Interfaces Using Vibrational Spectroscopy |
Miller | Kent | Ph.D. | 2012 | Production of Poly(lactic acid) Biodegradable Films and the Introduction of a Novel Initiation Method for Free Radical Polymerization via Magnetic Fields |
Miller | Ronald | M.S. | 1991 | Polyethyl Acrylate Viscoelastic Characterization, Interaction with Carbon Black, and Heat Aging of Vulcanizates |
Mishra | Ratan | Ph.D. | 2012 | Simulation of Interfaces in Construction Materials: Tricalcium Silicate, Gypsum, and Organic Modifiers |
Mitra Aravind | Arpita | M.S. | 2000 | Rheological, Kinetic and Chemorheological Studies of Gum SBR Compound |
Modi | Arvind | Ph.D. | 2016 | Direct Immersion Annealing of Block Copolymer Thin Films |
Modic | Michael | M.S. | 1986 | Self-Reinforced Melt Processible Polymer Composites |
Montes | Sergio | Ph.D. | 1991 | Rheology and Processing of Carbon Black Compounds |
Moon | Chae-Woo | Ph.D. | 1999 | Kinetic and Rheological Studies of Silica Filled SBR Compounds |
Mu | Shenglong | M.S. | 2016 | A Real-time Study on Mechano-optical Properties of Chitosan during Film Formation and Processing |
Mukherjee | Partha | M.S. | 1989 | Phase Transformations in Hydroxypropyl Cellulose |
Mulligan | Jake | Ph.D. | 2004 | Non-Linear Stress Optical Behavior of Poly L-Lactic Acid and its Nanocomposites During Stretching/Relaxation/Retraction from Amorphous Precursors |
Nagaraj | Phaniraj | M.S. | 2003 | A Study of the Factors Affecting Performance of Layered Silicate Nanocomposites Using Styrene-Co-Acrylonitrile model Polymer System |
Nah | Chang-Woon | Ph.D. | 1995 | Wear Mechanisms of Rubber Compounds |
Nalawade | Priyanka | Ph.D. | 2015 | Alkyd-based High-solid and Hybrid Organic Coatings |
Nallapaneni | Asritha | Ph.D. | 2020 | Biomimetic Non-Iridescent Structural Colors via Phase-Separation of Compatibilized Polymer Blend Films |
Nam | Joonhyun | Ph.D. | 1993 | Phase Transitions in a Thermotropic Copolyester and Phase Behavior of its Blends |
Nanjudiah | Kumar | M.S. | 2003 | Development of Phototonic Crystals Induced by Pattern Photo-Polymerization via Holographic Interface Technique |
Narayan | Kiran | M.S. | 1998 | A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections |
Narute | Suresh | Ph.D. | 2022 | Highly Ion Conductive Polymer Electrolyte Networks for Energy Storage Applications |
Nebioglu | Ahmet | Ph.D. | 2006 | Network Formation and Thermo-Mechanical Properties of Photo-Curing Inorganic/Organic Hybrid Coatings |
Negandhi | Nishant | M.S. | 2003 | The Use of Eximer Laser in Evaluation of Processing Effects in Injection Molded PET and PBT |
Niemeyer | Matthew | M.S. | 1989 | Processing-Structure-Property Relationships in Cool Rolled PEEK Poly(ether ether Ketone) and PPS Poly(p-phenylene Sulfide) |
Niknezhad | Sepideh | Ph.D. | 2017 | Strategic Design of Nanofiber Carriers for Drug Release |
Niknezhad | Setareh | Ph.D. | 2013 | Ultrasonically Assisted Single Screw Extrusion, Film Blowing and Online Film Casting of LLDPE/Clay and PA6/Clay Nanocomposites |
Nirantar | Prasad | M.S. | 2001 | Optimization of Adhesively Bonded Single Lap Joints by Tapering of Adherends |
Norton | Edward | M.S. | 2019 | Steady State and Dynamic Oscillatory Shear Properties of Carbon Black Filled Elastomers |
Nugay | Isik Isil | Ph.D. | 2014 | Polyurethanes in Rigid and Flexible Electronics Novel Hybrid Processing Techniques and Real-Time Monitoring of Material Properties |
Nwabunma | Domasius | M.S. | 1996 | Development of Birefringence-Free Optical Adhesives Via Optical Anisotropy Compensation : Blends of Reactive Copolymer and Homopolymer |
Nwabunma | Domasius | Ph.D. | 1999 | Photopolymerization-Induced Phase Separation and Morphology Development in Liquid Crystal/Polymer Blends |
Offenbach | Ido | Ph.D. | 2016 | Mechano Optical Behavior of Novel Polymers for Capacitor Application during their Processing Cycles |
Oh | Jeong-Seok | Ph.D. | 2003 | Applications of Powerful Ultrasound to Thermoplastic Elastomers and Rubbers |
Okuno | Shigeki | Ph.D. | 1996 | Solvent-Dependent Plateau Modulus and Time-Dependent Dynamic Moduli of Plasticized Polymer Containing Multiple-Branched Molecules |
Opalko | Robert | M.S. | 2008 | Mechanisms of Nanoparticle Induced Morphology Development in Immiscible Blends of Polypropylene/Polystyrene |
Osanaiye | Gabriel | Ph.D. | 1994 | On the Rheological Properties of Suspensions, Filled Thermoplastics and Rubber Compounds |
Oshiro | Tadashi | M.S. | 1999 | Application of the Ginzburg-Landau Theory to Polymer Crystallinization |
Ou | Xuesong | Ph.D. | 2004 | Structural Mechanisms as Revealed by Real Time Mechano Optical Behavior of Polylactic Acid Films in Uni and Biaxial Deformation and Heat Setting Processes |
Ou-Udomying | Boonharn | M.S. | 1993 | Development of High-Impact Polyamide Molding Resin, Blend of Nylon-66 with Poly(ethyl acrylate) Rubber |
Ozisik | Rahmi | M.S. | 1996 | Phase Behavior and Structure Development in Melt Spun PEEK/PEI Blends |
Ozturk | Ozgu | M.S. | 2004 | Optimization of Thermoplastic Impregnation of Glass Rovings with Pultrusion |
Pable | Hrishikesh | M.S. | 2024 | Microscopic Dynamics and Macroscopic Rheology of Soft Particle Glasses |
Pan | Shuyang | M.S. | 2016 | Z-Alignment of Halloysite Nanotubes in Norland 65 |
Panchal | Jatin | M.S. | 1999 | Influence of Composition on Deformation Behavior in Blends of PEEK and PEI |
Pande | Mumu | M.S. | 1999 | Wear Rate Investigation and Wear Particle Characterization of Silica-Silane and Carbon Black Reinforced Rubber |
Pantoja | Marcos | Ph.D. | 2019 | Compounding and Processing Approaches for the Fabrication of Shape Memory Polymers |
Paramonov | Pavlo | Ph.D. | 2005 | Theoretical Modeling of the Nanostructure Formation in Soft Condensed Matter Using Atomic Force Microscopy |
Park | Dongkyu | M.S. | 1992 | Single Phase Blends of Bisphenol a Polycarbonate and Poly(Phenyl Methacrylate) |
Park | Dongsik | Ph.D. | 2008 | Self-Assembled Patterns of Block Copolymer/Homopolymer Blends |
Park | Ho-Sung | Ph.D. | 1990 | Fundamental Studies on Processing, Characterization & Properties of Poly-p-phenylene Terephthalamide/Polyamides Molecular & Particulate |
Park | Jong-Hyun | Ph.D. | 2004 | A Study on Nanocomposites of Epoxy-Clay and Epoxy-Clay-Thermoplastic Polymer Systems |
Park | Soo Jeoung | Ph.D. | 2008 | Photopolymerization-Induced Crystallization in Relation to Solid-Liquid Phase Diagrams of Blends of Poly(Ethylene Oxide)/ Multi-Functional Acrylate Monomers |
Parnell | Shane | Ph.D. | 2002 | The Reactive Blending of a Thermoplastic Polyurethane In Situ with Poly(Vinyl Chloride) |
Patel | Kalpesh | M.S. | 1994 | Thermal and Reaction Induced Phase Separation in Thermoset/Thermoplastic Blends |
Patel Keskar | Nisha | M.S. | 2000 | Reactive Compatibilization of PBT/PPO Blends Using Low Molecular Weight Epoxies |
Patil | Ajeeta | M.S. | 2004 | Synthesis and Microfabrication of Aligned Carbon Nanotubes |
Patil | Renuka | Ph.D. | 2021 | Fabrication of pH Responsive Membranes Using 248 nm KrF Excimer Laser |
Pattanayak | Asim | Ph.D. | 2005 | Clay-Tethered Thermoplastic Polyurethane Nanocomposites by Bulk Polymerization Methods |
Pedraza | Erika | M.S. | 2006 | A Study of the Effects of Functionality on Certain Aspects of Cross-Linkable Latex Systems |
Pellegrene | Brittany | Ph.D. | 2019 | Modification of Alkyd Resins and Seed Oil Based Reactive Diluents for High Performance Coatings |
Peng | Bohao | M.S. | 2024 | Microstructure, Crystalline Structure and Mechanical Property of Highly Branched Polyethylene |
Peng | Fang | M.S. | 2014 | Controlling Radial Compositional Gradient in Electrospun Polyacrylonitrile/Silver Composite Fibers using Chemical Solvent Vapor Treatment and Sintering Technique |
Peng | Fang | Ph.D. | 2018 | Core-Shell Structured Filaments for Fused Filament Fabrication 3D-Printing |
Perego | Alessandro | Ph.D. | 2022 | Microstructure and Rheology of Vitrimers Using Hybrid Molecular Dynamics and Monte Carlo Simulations |
Perilla | Jairo | Ph.D. | 2004 | A Study of the Relationship Between the Morphology and Rheology of Immiscible Polymer Blends with Temporal Changes in the Interfacial Area |
Pitia | Emmanuel | Ph.D. | 2012 | Composite Proton Exchange Membrane Based on Sulfonated Organic Nanoparticles |
Pole | Sandeep | Ph.D. | 2019 | Constitutive Modeling of the Rheological Behavior of Rubber Compounds and Plastic Composites |
Popa Stilke | Morgan | M.S. | 2016 | Diffusive and Deformation Behavior of Physically Crosslinked Hydrogels |
Pratiwada | Chaitanya | M.S. | 2012 | High Fidelity Detection of Defects in Polymer Films Using Surface-Modified Nanoparticles |
Prieto | Alberto | M.S. | 2001 | Wood Flour Composites of High Temperature Polymers by Reaction Induced Phase Separation |
Puatrakul | Tithinun | Ph.D. | 2000 | Studies of Ionic Conductivity of Uniaxially Stretched Polymer Electrolytes Films |
Puttarudraiah | Amrutheswar | M.S. | 2003 | Upgrading Recycled Waste Stream Polyethylene by Modification with Nanoscale Clay Hybrids |
Qian | Jiajie | M.S. | 2014 | Control of C60-POSS Nanoparticle Location in Directed Self-Assembly of Block Copolymer Thin Films |
Qian | Jin | M.S. | 2018 | Swelling and Plasticization of Polymeric Binders by Li-Containing Carbonate Electrolytes Using Quartz Crystal Microbalance with Dissipation |
Qiang | Zhe | M.S. | 2013 | Morphology Control in Mesoporous Carbon Films Using Solvent Engineering |
Qiang | Zhe | Ph.D. | 2016 | Simple, Generalized Method to Highly Aligned Block Copolymer Films: Solvent Vapor Annealing with Shear |
Qiu | Jialin | M.S. | 2015 | Synthesis of High Molecular Weight Poly (methyl methacrylate by Activators Regenerated by Electron Transfer Atom Transfer Radical Polymerization |
Qu | Cheng | Ph.D. | 2013 | Novel Polymer Electrolyte Membranes for Ni-Zn Battery |
Quade | Derek | Ph.D. | 2017 | Investigation of Interfacial Bonding Between Shape Memory Alloys and Polymer Matrix Composites |
Rahman | Tamanna | Ph.D. | 2020 | Interfacial Effects on Rheological Response of Nanoconfined Polymers |
Rajaraman | Hariharan | M.S. | 1992 | Effect of Fillers on the Spin Welding Behavior of Poly-p-phenylene Sulfide Resins |
Rajgarhia | Stuti | Ph.D. | 2016 | Control of Morphology and Diameter of Bicomponent Polymeric Nanofibers with Applications in Filtration |
Rajput | Pankaj | M.S. | 2003 | Long Term Migration Effects on the Pull-Out Strength of Silver Wire Embedded in an Adhesive Matrix |
Ramanujam | Anand | M.S. | 1998 | Phase Behavior and Vulcanization Induced Phase Separation in Blends of Syndiotactic PP and Ethylene Propylene Diene Terpolymer |
Ramezani-Dakhel | Hadi | Ph.D. | 2015 | Bioengineered Metal Nanoparticles: Shape Control, Structure, and Catalytic Functionality |
Ramirez-Huerta | Mayela | M.S. | 2004 | Influence of Blend Composition on Structure Development During Uniaxial Stretching of Poly(vinyl chloride)/Poly(e-Caprolactone) |
Ramirez-Huerta | Mayela | Ph.D. | 2009 | Steric and Anchimeric Effects on the Hydrolysis of Oligoesters and their Influence on End-Use Polyurethane Coatings |
Randall | Jason | Ph.D. | 2010 | Tailoring Structure Property Relationships and Elastic Phenomenon in Native and Polymer Reinforced Silica Aerogels |
Rathi | Pankaj | Ph.D. | 2009 | Theoretical Modeling of Morphology Development in Blends of Semicrystalline Polymers Undergoing Photopolymerization |
Raut | Prasad | Ph.D. | 2017 | Towards Development of Polymeric Compounds for Energy Storage Devices and for Low Energy Loss Tires |
Razzaghi-Kashani | Mehdi | M.S. | 1997 | Analytical Simulation of Mechanical Processes of Wear for Rubber Vulcanizates |
Razzaghi-Kashani | Mehdi | Ph.D. | 2000 | A Numerical Approach Towards Understanding the Mechanism of Fatigue Wear in Tread Vulcanizates During Rolling of Tires |
Reagan | Michael | M.S. | 2009 | Electric Charging and Nanostructure Formation in Polymeric Films Using Combined Amplitude-Modulated Atomic Force Microscopy Assisted Electrostatic Nanolithography and Electric Force Microscopy |
Ren | Tianli | M.S. | 2017 | Fabrication and Evaluation of Electrochemical Performance of Solid Polymer Electrolyte Membrane for Lithium-Ion Battery |
Ren | Xianjie | M.S. | 2016 | Use of Fly Ash as Eco-friendly Filler in Synthetic Rubber for Tire Applications |
Rendon Piedrahita | Camilo | Ph.D. | 2018 | Study of Highly Conductive, Flexible Polymer Electrolyte Membranes and their Novel Flexoelectric Effect |
Rhee | Sangkeun | Ph.D. | 2000 | Structure Development of Polyamides (=Nylons) in Film Extrusion and Stretching Processes |
Riley | Stephen | Ph.D. | 2024 | Impact of Pyrolyzed Soybean Hull Filler Interactions on High Density Polyethylene and Nylon-6 Composites |
Rottmayer | Christopher | M.S. | 2004 | Optimization of Epoxy Bonding to Granite Based on Fracture Considerations |
Roy | Sayantan | Ph.D. | 2011 | Polyhedral Oligomeric Silsesquioxane-Sorbitol Non-Covalent Interactions: Effects on the Reinforcement of Isotactic Polypropylene Spun Fibers |
Ruan | Dihui | M.S. | 2015 | Glass Formation Behavior of Model Ionomers |
Sadeghi | Mohammad | M.S. | 1987 | Effect on Plasticizer type on Gelation and Fusion Behavior of Polyvinyl Chloride Plastisol |
Saifee Valsadwala | Abbas | M.S. | 2023 | Understanding the Crystallinity of Carbon Black and its Effects on Filled Rubber Compounds |
Salata | Ryan | Ph.D. | 2017 | Modified Alkyds for High Solids Coatings and Adhesives |
Saldanha Singh | Jeanne | M.S. | 1987 | Phase Separation Phenomena in Polymer Blends: Mechanisms and Controlled Morphology |
Salunke | Namrata | Ph.D. | 2018 | Self-Assembly of Functional Amphiphilic Triblock Copolymer Thin Films |
Samant | Saumil | Ph.D. | 2016 | Directed Self-assembly of Block Copolymers for High Energy Density Polymer Film Capacitors |
Sanghvi | Mukesh | M.S. | 1991 | Rheology and Instabilities of Extrusion Coating Process |
Satam | Sayali | Ph.D. | 2018 | Optimization of Wet Friction Systems Based on Rheological, Adsorption, Lubricant and Friction Material Characteristics |
Sau | Madhusudan | Ph.D. | 2003 | Morphology Development in Chaotic Mixing of Polymers |
Scavuzzo | Robert | M.S. | 1993 | Computer Simulation of the Filling and Post Filling Stages of the Injection Molding Cycle of a Rubber Compound |
Schaal | Stephane | Ph.D. | 2000 | The Study and the Prediction of the Rheology and Processing of Tire Compounds |
Schaible | Stephen | M.S. | 1992 | Investigations into Instrumented Spin Welding and Vibration Weldin of Poly(vinylidene) Fluoride |
Schaner | Jason | M.S. | 2018 | The Impact of Nanoclay Addition on PVC Pressure-Sensitive Digital Printed Films |
Schauber | David | M.S. | 2002 | The Behavior of Filament-Wound Carbon Fiber/Epoxy Composite Tubes Under Axial Compression |
Schmidt | Ryan | M.S. | 2011 | Magnetic Nanoparticle Field Directed Self-Assembly: Magnetic Flux Line Mapping and Block Copolymer Driven Assembly |
Scobbo | James | M.S. | 1986 | Behavior of Gum Elastomers and Carbon Black-Filled Compounds in Shear and Elongational Deformation: Effect of Gel, Filler and Elastomer Type |
Scobbo | James | Ph.D. | 1989 | Rheology, Processing and Mechanical Properties of Thermoplastic/Graphite Fiber Composites |
Seif | Sylvain | Ph.D. | 2009 | Temporally Programmed Stretching of Polymer Films: Influence of Nanoparticles |
Sen | Taner | Ph.D. | 2003 | Investigation of Dynamics and Structure Development During Uniaxial Stretching of PET Films at Different Molecular Weights Using Fully Automated Spectral Birefringence Technique |
Sepulveda-Medina | Pablo | Ph.D. | 2021 | Ice Inhibition Properties of Supramolecular Hydrogels |
Seo | Junyoung | Ph.D. | 2019 | D-Glucaric Acid Based Polymers and Crosslinkers: Polyesters Bearing Pendent Hydroxyl Groups and Dissolvable Chemically Crosslinked Gels |
Serhatkulu | Toprak | Ph.D. | 2000 | Crystallization and Birefringence Studies on Fast Structural Changes Followed by Non-Contact Spectral Birefringence and Raman Spectroscopy Techniques |
Severe | Geralda | Ph.D. | 1999 | Characterization and Development of New Hydrogenated Acrylonitrile-Butadiene Rubber Blends |
Seylar | Joshua | Ph.D. | 2022 | Scalable Synthesis of Helicenes: Enabling the Application of Helicenes to Next-Generation Materials |
Shah | Jayesh | M.S. | 1991 | Continuous Filament Reinforced Thermoplastics for Automative Body Panels |
Shah | Ketan | Ph.D. | 1987 | Characterization of Phase Behavior and Deformation Mechanisms of Polybutadienes, Styrene-Butadiene Copolymers and their Blends |
Shah | Nilay | M.S. | 2023 | Investigation on 3D-Printing of Homopolymer Polypropylene |
Shah | Nipesh | M.S. | 1999 | Study of Interfacial Adhesion and Injection Molding of Liquid Crystalline Polymer Blends |
Shah | Nirav | M.S. | 2001 | Design and Filament Winding of Composite Shield for Jet Engine Fan Blade Containment |
Shah | Sachin | M.S. | 1992 | Influence of Injection Molding Variables on the Mechanical Properties of Filled PBTP Using a Statistical Design of Experiment |
Shams Es-Haghi | Siamak | Ph.D. | 2015 | Mechanics of Tough Chemically Cross-Linked Hydrogels |
Shan | Haifeng | Ph.D. | 2006 | Structure Development in Melt Spinning, Cold Drawing and Cold Compression of Poly(ethylene-co-octene) with Different Octene Content) |
Shang | Jihui | M.S. | 2013 | Effect of Carbon Nanotube on Fabrication of Single-component and Bi-component Nanofibers by Gas Jet Method |
Shen | Chungsea | Ph.D. | 1995 | Phase Equilibrium and Phase Separation Dynamics in Polymer Dispersed Liquid Crystals |
Shen | Lening | M.S. | 2021 | High-Performance Perovskite Solar Cells by Active Layer Composition Engineering |
Shen | Liyang | M.S. | 2015 | Real-Time Mechanical and Mechano-Electrical Behavior of Carbon Black Filled Films |
Shen | Naifu | M.S. | 2021 | Macromolecular Engineering and Additive Manufacturing of Poly(styrene-b-isobutylene-b-styrene) (SIBS) |
Shi | Ying | Ph.D. | 2013 | High Temperature Shape Memory Polymers and Ionomer Modified Asphalts |
Shieh | Woei-Jian | M.S. | 1990 | Processability of Silica Filled Compounds |
Shim | Sang Eun | Ph.D. | 2002 | Ultrasound Devulcanization of Silica Filled Silicone Rubber: Processing, Property and Molecular Aspects |
Shimojo | Kenichi | M.S. | 1993 | Characterization of Strain-Induced Crystallization in Relation to Injection Molding of Thermoplastics |
Shin | James | M.S. | 2013 | Shape Memory Elastomers and Fatty Acid Organogels: Functional Materials from Small Molecule Additives |
Shin | Jin-Woong | Ph.D. | 2003 | The Effect of Processing Parameters on Pressure Development, Gas Penetration Length and Residual Wall Thickness in Gas Assisted Injection Molding |
Shin | Kyung Chul | M.S. | 1989 | Influence of Carbon Black on Extrudate Swell and Shrinkage in Rubber Compounds |
Shin | Kyung Chul | Ph.D. | 1994 | A Basic Study of a Pin Barrel Screw Extruder |
Shinko | Andrew | Ph.D. | 2015 | Structure and Morphology Control in Polymer Aerogels with Low Crosslink Density |
Shockey | Frederick | M.S. | 1996 | Relaxation Modulus Approximation with Fractional Calculus |
Shon | Keungjin | Ph.D. | 2003 | Mixing Studies in Modular Intermeshing Co-Rotating Twin Screw Extruder, Modular Counter-Rotating Twin Screw Extruder, Buss Kneader and Kobelco Nex-T Continuous Mixer |
Shyu | Goang-Ding | Ph.D. | 1993 | Birefringence and Residual Stresses in Molded Articles of Amorphous Polymers |
Silin | Maxim | Ph.D. | 2002 | Some Problems of Polymer Flows in Channels and Dies |
Simhambhatla | Murthy | M.S. | 1990 | Fundamental Studies on Biaxial Stretching, Plasma Treatment, and Vacuum Metallization of Poly(ether ether ketone) (peek) Films |
Simhambhatla | Murthy | Ph.D. | 1994 | The Rheological Modeling of Simple Flows of Unfilled and Filled Polymers |
Simmons | Sean | M.S. | 1999 | Optimization of Adhesively Bonded Single Lap Joints by Adherend Notching |
Singh | Gurpreet | Ph.D. | 2013 | Dynamic Thermal Field-Induced Directed Self-Assembly of Block Copolymer Thin Films |
Smith | Scott | Ph.D. | 2018 | Resolving the Molecular Origins of Reinforcement in Filled Elastomers using Molecular Simulation |
Sobani | Masoud | Ph.D. | 2018 | Smart Flexible Anticorrosion Coating |
Sobhanie | Mohammed | M.S. | 1996 | Rheological Models for Particle Filled Polymers |
Sohn | Min-Seok | M.S. | 1989 | Characterization of Rotational Molding Resin Powders and Study of Structure-Property of Rotationally Molded Sample |
Song | Chang Hoon | M.S. | 1994 | Phase Separation and Electro-Optical Properties of Polymer Dispersed Liquid Crystal Films |
Song | Chang Hoon | Ph.D. | 1999 | Self-Reinforced Composites of Polyesters and PET/HBA Based LCP |
Song | Han Jong | M.S. | 1987 | Die Extrusion of Rubber Compounds : Flow Patterns and Extrudate Character |
Song | Kwangjin | Ph.D. | 1998 | Structure Development of Polyester and their Blends in Film Formation Processes |
Song | Lin | Ph.D. | 2010 | Chemical Modification of Starch and Preparation of Starch-based Nanocomposites |
Song | Sang-Sub | Ph.D. | 1990 | Fundamental Study of Structure Development and Processing in Polycondensate Compounds |
Soundarrajan | Prabhu | M.S. | 2003 | Electrochemical Devices Based on Conducting Polymers and Aligned Carbon Nanotubes |
Sridhar | Siddhamalli | M.S. | 1998 | Toughening of Epoxy/Thermoplastic Composites via Reaction Induced Phase Separation |
Sridharan | Harini | M.S. | 2020 | Coupled Dynamics of Heat Transfer and Fluid Flow in Shear Rheometry |
Srinivasan | Ashok | M.S. | 1992 | Nonlinear Modeling of Melt Flow Instability |
Stadler | Michael | M.S. | 2004 | Viscoelastic Properties of Unreinforced and Reinforced Plastic Lumber |
Su | Wen-Yi | M.S. | 1993 | In-situ Copolymerization and Compatibilization of Polyester and Polystyrene Blends |
Subramaniam | Pazampalacode | M.S. | 1993 | Blends and Composites of a Liquid Crystal Polymre with an Engineering Thermoplastic |
Sudhindrakumar | Guruprasad | M.S. | 2003 | A Novel Economical Method to Improve the Toughness of CArbon/Epoxy Long Fiber Components by the Integration of Glass Tow Loops Core |
Suh | Chang Ho | Ph.D. | 1995 | Rheology and Processing of Talc Filled Thermoplastics |
Suh | Jaein | Ph.D. | 2007 | Comparative Structure Development of Various Polyolefins in Injection Molding Process |
Suh | Kenneth | M.S. | 1991 | Fundamental Studies of Flow of Elastomers and Thermoplastics and Their Blends in an Internal Mixer, and Their Properties |
Sujan | Brijesh | M.S. | 2005 | Revulcanization of Ultrasonically Devulcanized Tire Rubber: Cure Kinetics and Physical Properties |
Sun | Mingze | M.S. | 2021 | Digital Light Processing 3D Printing of Reconfigurable Reprintable Ion-Crosslinked Shape Memory Polymer |
Sun | Weicheng | M.S. | 2018 | Use of Torrefied Sorghum as Eco-Friendly Filler in Styrene Butadiene Rubber |
Sun | Ximei | Ph.D. | 2007 | The Devulcanization of Unfilled and Carbon Black Filled Isoprene Rubber Vulcanizates by High Power Ultrasound |
Sun | Yan | Ph.D. | 2016 | Controlled Morphology in Bulk Heterojunction Polymer and Perovskite Solar Cells |
Sundarapandian | Senthil Kumar | M.S. | 1993 | Viscoelastic Characterization of Poly(ethyl acrylate) |
Sunthonpagasit | Nongnard | M.S. | 2000 | Improving Ultrasonic Weld Strength of Polypropylene by Joint Design, Polar Additives, and by the Methods of Excimer Laser, and Solvent Treatment |
Suppiah | Giritharan | M.S. | 2002 | Effects of Plasticizers with Various Molecular Weight and Structure on Properties of Polyvinyl Chloride and its Blend with Polyurethane |
Suri | Atul | M.S. | 1999 | Electrical Conductivity and Characterization of Polypropylene and Chemically Modified Polypropylenes Filled with Copper Powder |
Swaminathan | Suresh | M.S. | 1988 | Thermoplastic Fiber-Reinforced Composites Based on Liquid Crystalilne Polymers |
Tandel | Vijay | M.S. | 1994 | Miscibility and Conductivity of Polyethylene Oxide and Polypropylene Oxide Blends Complexed With a Copper Salt |
Tang | Kangli | M.S. | 2015 | Study of Genistein/Epoxidized Natural Rubber (ENR) Blends and its Application for Poly(vinyl chloride) (PVC) Plasticization |
Tangvigitsakul | Pattarasai | Ph.D. | 2015 | Methoxy Poly(ethylene glycol) Methacrylate-based Copolymers on the Applications of Concrete Admixtures, Mesoporous Materials, and Rheology Modifiers |
Tapale | Mayuresh | M.S. | 1998 | Continuous Ultrasonic Devulcanization of Unfilled Natural Rubber Vulcanizates |
Teli | Samar | M.S. | 2002 | Stress States and Interference in Double Adhesive Layer Scarf and Butt Joints |
Teo | Nicholas | Ph.D. | 2019 | Nano, Micro and Macro Scale Control of Porous Aerogel Morphology |
Thakkar | Hemant | M.S. | 2003 | The Morphology, Rheology and Processing of Thermoplastic Vulcanizates and Their Nanocomposites |
Thomas | Jomin | Ph.D. | 2023 | Towards Polymer Sustainability via the Development of Sustainable Thermosets and Composites from Norbornylized Seed Oils, and Assessment of Environmental Impact of Tires |
Thongtan | Roungrong | M.S. | 2006 | Morphological Study of Compatibilization of Immiscible Polymer Blends Using a Functionalized Block Copolymer |
Tiwari | Ankit | Ph.D. | 2018 | Fabrication of Temperature Responsive Membranes using 248 Nanometer Krypton Flouride Excimer Laser |
Trivedi | Meeta | Ph.D. | 2022 | Towards the Development of Polymeric Materials for Lithium-Ion and Post-Lithium-Ion Technology |
Tsai | Cheng-Han | M.S. | 2023 | Flexible Optical Materials by Molecular Engineering and Integration of Perovskite Quantum Dots and Thermoplastic Elastomers |
Tsai | Hsien-Yin | M.S. | 1992 | The Deformation and Instability of Phase Morphology of Fluoroelastomer and Polycarbonate Blends |
Tsai | Hsien-Yin | Ph.D. | 1995 | Functionalization of Polystyrene and Low Density Polyethylene and Their Reactive Blending With Polyethylene Terephthalate |
Tse | Joseph | M.S. | 1989 | Processing-Structure-Property Relationships in Biaxially stretched Poly (Butylene Terephthalate)/Poly(Ethylene Isophthalae) Blends |
Ulcer | Yakup | Ph.D. | 1995 | Injection Molding of Slowly Crystallizing Polymers |
Unsal | Emre | Ph.D. | 2013 | Integrated Real Time Studies to Track All Physical and Chemical Changes in Polyimide Film Processing: From Casting to Imidization |
Vadhar | Parimal | M.S. | 1985 | Co-Crystallization and Miscibility Studies of Ultra-High Molecular Weight Polyethylene Blends |
Vaidya | Nitin | Ph.D. | 1999 | Rheology, Phase Behavior and Morphology of Blends Containing Diblock Copolymer |
Valladares | David | M.S. | 2002 | Real Time Strain Induced Crystallization and Structural Hierarchy Time Evolution in Crosslinked Natural Rubber |
Van Sweden | Chadwick | M.S. | 2000 | Effect of Processing Conditions on Microstructure and Mechanical Properties of Injection Molding of Polypropylenes of Various Molecular Weights |
Varkey | Joseph | Ph.D. | 1999 | Industrial and Scientific Significance of Polymer-Solvent Interaction Through Viscoelastic Properties |
Varma | Rajesh | M.S. | 1997 | Miscibility Studies of Blends of Block Copolymers and Asphalt |
Varma | Tilak | M.S. | 1991 | Blends of Thermoplastics Polyamides and a Lliquid Crystal Polymer |
Venkateswaran | Hari | M.S. | 1992 | A Fast Dual Wavelength Optical Technique to Study Crystallization in Pre-Oriented PET Films |
Viswanathan | Ravishankar | M.S. | 1994 | Mixing, Injection Molding and Lamination of Liquid Crystal Polymer Blends |
Vongpanish | Pratum | Ph.D. | 2000 | Engineering Polymer Blends Based Upon Phenolic-Modified Polyolefins |
Vorontsov | Sergey | Ph.D. | 2015 | Rheology of Ionomers |
Wadley | Maurice | Ph.D. | 2011 | Synthesis and Morphology Characterization of Polydimethylsiloxane-Containing Block Copolymers |
Walker | Eric | M.S. | 2000 | Effect of Fillers on Ultrasonic Welding of Polypropylene |
Wan | Min | Ph.D. | 1995 | Injection Molding of Rubber Compound with Rheology Affected by Vulcanization |
Wang | Chao | Ph.D. | 2018 | Effect of Reversible Crosslinks on Nanostructure and Properties of Supramolecular Hydrogels |
Wang | Chi | Ph.D. | 1992 | Fracture Mechanics of Model Fiber composites |
Wang | Dongbiao | Ph.D. | 2005 | In-Line Monitoring and Analysis of Polymer Melting Behavior in an Intermeshing Counter-Rotating Twin-Screw Extruder by Ultrasound Waves |
Wang | Enmin | M.S. | 2013 | A Real Time Study on the Mechanoptical Properties of Polyvinyl Alcohol: Effect of Water |
Wang | Enmin | Ph.D. | 2017 | Photo-Curable Electrical Contact Stabilization Materials |
Wang | Kai | M.S. | 2014 | Magnetic Nanoparticles and Magnetic Effects Induced Novel Anode Buffer Layer for Polymer Solar Cells |
Wang | Kai | Ph.D. | 2017 | High Performance Solution-processed Perovskite Hybrid Solar Cells through Device Engineering and Novel Materials |
Wang | Haoran | M.S. | 2016 | Preparation Titanium Oxide/Epoxy Hybrid Anticorrosive Coating |
Wang | Lei | M.S. | 1998 | Reactive Processing for Enhancement of Adhesion of Polypropylene with Acidic Monomers |
Wang | Min-Diaw | M.S. | 1989 | Processing-Structure-Property Relationships in Biaxially Stretched and Tubular Blown Thermoplastic Elastomer Films |
Wang | Qianhe | M.S. | 2013 | Investigation of Acrylated Alkyd |
Wang | Qianhe | Ph.D. | 2016 | Acrylated Alkyds |
Wang | Qiaoyun | M.S. | 2020 | Hydrophobically Modified Polyelectrolytes to Tune Properties of Coacervates |
Wang | Shiping | M.S. | 2019 | Thickness and Crystallinity Dependent Swelling of Poly(ethylene oxide)/Poly(methyl methacrylate) Blend Films |
Wang | Siyang | M.S. | 2016 | Role of Amphiphilic Block Copolymer Composition on Pore Characteristics of Micelle-templated Mesoporous Cobalt Oxide Films |
Wang | Xiao | Ph.D. | 2013 | Tailoring of Pore Structures and Surface Properties of Syndiotactic Polystyrene Aerogels |
Wang | Xiaojiang | Ph.D. | 2012 | Polyester Based Hybrid Organic Coatings |
Wang | Xiaoteng | M.S. | 2016 | Directed Nano-patterning of Polymer Nanocomposite Thin Films |
Wang | Xiaoteng | Ph.D. | 2019 | Nanoimprinting Directed Assembly of Polymer-Grafted Nanoparticles in Polymer Thin Films |
Wang | Xueyuan | Ph.D. | 2012 | Control and Characterization of Textured, Hydrophobic Ionomer Surfaces |
Wang | Yeh | Ph.D. | 1988 | Analysis and Computer-Aided Design of Extrusion Dies for Shaping of Rubber Compounds |
Wang | Yi | M.S. | 2014 | Synthesis and Characterization of Amphiphilic Poly(ethylene oxide)-Block Poly(octadecyl acrylate) Block Copolymers |
Wang | Yundong | Ph.D. | 1996 | Processing-Structure-Property Relationships in Injection Molded PVDF and Blends of PVDF and PMMA |
Wang | Zixin | M.S. | 2017 | Towards High-Performance Perovskite Solar Cells by Cathode Interfacial Engineering with Ternary Metal Oxide and Device Engineering with Bulk Heterojunction |
Wang Cordry | Shanshan | Ph.D. | 2007 | Development of Polymer Electrolytes of Polyurethane and Polyether Modified Polysiloxane Blends with Lithium Salts |
Wei | Chunding | M.S. | 2017 | High-Performance Asymmetric Supercapacitors Mainly Based on Metal Chalcogenide Compounds Electrode Materials |
Weinheimer Deaver | Emily | Ph.D. | 2020 | Processing of Novel 3D Printing Materials and Facilitation of 3D Printing for Enhanced Mechanical and Structural Stability |
Weisen | Albree | M.S. | 2021 | Thermorheological Dynamics of Glycerol-Based Colloidal Silica Suspensions |
Wen | Shihao | M.S. | 2016 | Design of Multi-drug Release Coaxial Electrospun Mat Targeting Infection and Inflammation |
Wiener | Clinton | Ph.D. | 2017 | Physically Crosslinked Hydrogels: Impact of Interfaces and Stress on Structure and Properties |
Wong | Chang Min | Ph.D. | 1990 | The Effects of Sound and Ultrasound Oscillations upon Polymer Extrusion |
Woods | Rochelle | M.S. | 1992 | Instrumented Compaction of Polymer Powders and Processing Structure Property Relationships |
Wu | Chonggang | Ph.D. | 2006 | Transesterification, Mechanical Properties and Rheology of Blends of Thermoplastic Polyester and Model Thermotropic Polyester |
Wu | Dezhen | M.S. | 2018 | Magnetic Field Effects Induced by Incorporation of Magnetic Nanoparticles on Bulk Heterojunction Polymer Solar Cells |
Wu | Jiawei | M.S. | 2015 | Physical Properties of Blends of Triblock Copolymer (SEBS) with Low Molar Mass Liquid Crystals |
Wu | Jinping | Ph.D. | 2013 | Investigation of Radiation Crosslinking Styrenic Block Copolymers and Maleimide-Terminated Imide Oligomers |
Wu | Jong-Pyo | Ph.D. | 1991 | A Unified View of Polymer Chain Orientation in Complex Orientation State |
Wu | Leyao | M.S. | 2019 | Effect of PET Support Membrane Thickness on Water Permeation Behavior at Thermally Responsive PNIPAM-g-PET Membranes |
Wu | Xinchi | M.S. | 2019 | Covalently Crosslinked Coacervates with Enhanced Stabilization and Salt Partitioning in Complex Coacervates |
Wu | Yijie | M.S. | 2024 | High Voltage Stable Fluorinated Plasticizer Added Solid State Electrolyte for Lithium Ion Battery |
Wu | Zhenghao | M.S. | 2018 | Investigating the Effects of Grafting and Chain Stiffness on Nano-confined Polymers using Molecular Dynamics Simulation |
Wutticharoenwong | Kosin | Ph.D. | 2007 | Bio-Based Reactive Diluents and Thiol-Ene Photopolymerization for Environmentally Benign Coatings |
Xia | Xuhui | Ph.D. | 2020 | Tuning Porous Structure through Cooperative Assembly with Solvent Composition and Microwave Heating |
Xie | Kefu | M.S. | 1992 | Development of an In-Situ Curemeter |
Xie | Shaoxiong | M.S. | 2018 | Comparative Study on TIP/TIA/ZRP/TEOS Modified Epoxy Resin: Anti-Corrosion Performance |
Yingsheng | Ph.D. | 2011 | Finite Element Analysis of Drop Deformation in the Entrance Region of a Cylindrical Tube | |
Xu | Haijun | Ph.D. | 2004 | Effect of Self Generated Thermal Field on Spatio Temporal Growth of Hierarchical Structures During Polymer Crystalization |
Xu | Jingli | M.S. | 2000 | The Kinetics of Crystallization and Vulcanization Induced Phase Separation in Miscible Blends of Low Density Polyethylene and Ethylene Propylene Diene Terpolymer |
Xu | Lihua | M.S. | 2015 | Layer-by-Layer Directed Self-Assembly of Polyelectrolyte Multilayers with Foaming Structures |
Xu | Rongcheng | M.S. | 2017 | Anticorrosion UV Curable Alkyds |
Xu | Shengyi | M.S. | 2017 | Computational Insight into Kinetic Control of Star Polymer Structure and Properties |
Xu | Tong | M.S. | 2014 | UV-Curable Hybrid Polyurethanes |
Xue | Jiachen | M.S. | 2013 | Control of Long Range Orientation in Ordered Mesoporous Carbon Thin Films |
Yalcin | Baris | Ph.D. | 2004 | The Role of Clay Nanoparticles on the Development of Structural Hierarchy in Injection Molding of Nylon 6 and Uniaxial Stretching of Poly(vinyl chloride) |
Yan | Han | Ph.D. | 2011 | Electrospinning-Derived Carbon/Graphite Nanofiber Mats from a Polyimide-Mesophase Pitch Blend Precursor for Flexible Thermal Management Thin Films |
Yandek | Greogory | Ph.D. | 2005 | Experimental and Theoretical Investigations of Polymerization-Induced Phase Separation in Modified Epoxy Composite Materials and Photonic Crystals |
Yang | Chen | M.S. | 2017 | Photomultiplication Effect in Organic and Quantum Dots Photodetector and Device Structural Modification |
Yang | Jen-Chang | M.S. | 1989 | Miscibility Studies of Nafion Perflourinated Ionomer and Polyvinylidene Fluoride Blends |
Yang | Jen-Chang | Ph.D. | 1992 | Miscibility and Phase Transformations in Rigid Rod Molecular Composities |
Yang | Jinhai | Ph.D. | 2008 | Phase Morphology and Orientation Development of Polymer Blends in Melt Processing |
Yang | Junhong | M.S. | 2017 | Glass Formation Behavior and Ionic Conductivity of Ionic Liquids and Polymeric Ionic Liquid: Insight from Molecular Simulation |
Yang | Kumin | M.S. | 1995 | Effects of Shear Flow and Annealing on Morphology of Rapidly Precipitated Immiscible Polymer Blends |
Yang | Mo | M.S. | 2016 | Synthesis and Characterization of Halatopolymers by Reversible Addition Fragmentation Chain Transfer (RAFT) Polymerization |
Yang | Muxuan | M.S. | 2021 | Molecular Engineering of Polyaniline with Ultrathin Polydopamine and Monolayer Graphene for All-Solid-State Flexible Micro-Supercapacitors |
Yang | Shaoguang | M.S. | 2014 | Design and Investigation of Polyurethane End-Capped Polyesters with Controlled Hydrolytic Stability |
Yang | Yiming | M.S. | 2016 | Tough Stretchable Physically-crosslinked Hydrogel Fiber Mats from Electrospun Statistical Copolymers |
Yang | Yongrui | M.S. | 2020 | Quasi-Solid-State Flexible Supercapacitors with Novel Gel Electrolytes |
Yang | Zhiyi | Ph.D. | 2007 | Rheology of Miscible Polymer Blends with Hydrogen Bonding |
Yao | Yimin | M.S. | 2020 | Polymeric Porous Aerogel Monoliths and Aerogel Microparticles Synthesized from Oil-in-Oil Emulsions |
Ye | Changhuai | Ph.D. | 2016 | Microstructure Alignment and Mechanical Properties of Block Copolymer and Crystalline Polymer Thin Films |
Ye | Pin | M.S. | 1993 | Adhesion of Crosslinked Polyethylene |
Yi | Chao | M.S. | 2013 | Towards High Performance Polymer Solar Cells through Interfacial Engineering |
Yi | Chao | Ph.D. | 2016 | Solution Processed Polymeric Thermoelectrics and Photovoltaics |
Yoon | Pil Joong | Ph.D. | 1999 | Effect of Thermal History on the Rheology of Thermoplastic Polyurethanes |
Yoon | Yeo Cheol | M.S. | 1991 | Structure Development in Rolled Poly(Vinylidene Fluoride) Sheets |
Youn | Yeo-O | Ph.D. | 2004 | Structure-Morphology-Rheology Relationships in Thermopastic Polyurethanes |
Yu | Liqun | M.S. | 2000 | Injection Welding |
Yu | Yishan | Ph.D. | 2000 | Structure Development in Melt Processing Isotactic Polypropylene, Polypropylene Blends/Compounds and Dynamically Vulcanized Polyolefin TPES |
Yuan | Chuqing | M.S. | 2018 | Topographic Pattern Directed Phase Separation in PAN/PMMA Blend Thin Films |
Yuan | Hongyi | Ph.D. | 2014 | Structures and Properties of Polymer Nanocomposite Sub-Micron Thin Films |
Yucel | Orcun | Ph.D. | 2013 | Real Time Birefringence Gradient Development during Drying of Solution Cast Functional Films and their Mechanical, Optical and Gas Barrier Properties |
Yue | Peijing | M.S. | 2019 | Electrochemical Characterization and Evaluation of Flexoelectric Performance of Polymer Electrolyte Composite |
Yun | Jushik | Ph.D. | 2003 | Recycling of Waste Tires and EPDM Rubbers Using High Power Ultrasonic Devulcanization |
Yun | Seunghee | Ph.D. | 1994 | Fiber-Matrix Adhesion in Single Fiber Model Composites |
Zha | Weibin | Ph.D. | 2006 | Organoclay Nanocomposites Based on Vinylpyridine-Containing Block Copolymers |
Zhai | Chunhao | M.S. | 2016 | Polyimide Aerogels and their Applications in Removal of Airborne Nanoparticles |
Zhai | Qingpu | M.S. | 1994 | Air Lubricated Die for Rubber Extrusion |
Zhan | Chi | M.S. | 2018 | Towards Development of Porous Polymeric Materials for Oil Absorption and Energy Storage Devices |
Zhang | Baosen | M.S. | 2019 | Solution-Processed Broadbank Bulk Heterojunction Perovskite Photodetectors |
Zhang | Chao | M.S. | 2018 | Thickness Limit for Alignment of Block Copolymer Films using Solvent Vapor Annealing with Shear |
Zhang | Cheng | M.S. | 2017 | Pigmented Polyurethane/Polysiloxane Hybrid Coatings for Corrosion Protection |
Zhang | Chi | M.S. | 2015 | Anti-Icing and Drop Impact Behavior on Lubricant Infused Polyelectrolyte Multilayer Surfaces |
Zhang | Chi | Ph.D. | 2019 | Development of Functional Slippery Liquid Infused Surfaces with Enhanced Lifetime for Large Scale Productions |
Zhang | Huan | M.S. | 2014 | Properties and Structures of Sulfonated Syndiotactic Polystyrene Aerogel and Syndiotactic Polystyrene/Silica Hybrid Aerogel |
Zhang | Huan | Ph.D. | 2018 | Effects of Solution Composition (Salts, pH, Dielectric Constant) on Polyelectrolyte Complex (PEC) Formation and their Properties |
Zhang | Linkun | M.S. | 2015 | Mechano-Optical Behaviors of Ionomers |
Zhang | Longhe | Ph.D. | 2014 | Supramolecular Block Copolymers via Ionic Interactions |
Zhang | Mengxue | M.S. | 2019 | Influence of Sodium Salts on the Swelling and Rheology of Hydrophobically Crosslinked, Non-Ionic Hydrogels Determined by QCM-D |
Zhang | Ren | M.S. | 2013 | Dynamic Temperature Gradient Directed Self-assembly of Block Copolymer/Nanoparticle Thin Films |
Zhang | Ren | Ph.D. | 2016 | Directed Self-organization of Polymer-grafted Nanoparticles in Polymer Thin Films |
Zhang | Wenjin | M.S. | 2000 | Inverse Gas Chromatographic Studies of the Filler-Filler and Filler-Rubber Interactions |
Zhang | Xiao | M.S. | 2014 | Novel Approaches for Nanocomposites Preparation and Characterization |
Zhang | Xiao | Ph.D. | 2018 | Probing Polymer Dynamics using High Throughput Dielectric Spectroscopy |
Zhang | Xiuyuan | M.S. | 2019 | Perovskite Solar Cells with Restricted Photocurrent Hysteresis by Ionic and Polymeric Additives |
Zhang | Xuan | M.S. | 2016 | Polymer Films with Enhanced Through Thickness Optical Transmission and Compression Modulus with Electric Field Aligned Glass Fiber/Bubbles |
Zhang | Yuanzhong | M.S. | 2014 | Relationship between Crosslinking and Ordering for the Fabrication of Soft Templated Mesoporous Carbon Thin Films |
Zhang | Yuanzhong | Ph.D. | 2018 | Surface Interactions of Soft Interfacial Materials |
Zhang | Yue | M.S. | 2017 | Phase Separation of Polymer-grafted Nanoparticle Blend Thin Films |
Zhang | Zeyang | M.S. | 2016 | Interfacial Free Radical Polymerization of Maleic and 1,4-cyclohexanedimethyanol Divinyl Ether |
Zhang | Zhan | M.S. | 2015 | Effect of Interfacial Reengineering and Molecular Structure on Polymer Solar Cells |
Zhao | Mengmeng | Ph.D. | 2019 | Polyelectrolyte Complex Coacervation: Selective Solute Uptake, Tunable Rheological Properties and Applications |
Zhao | Shujing | M.S. | 2013 | Core-shell Nanofiber Assemblies Containing Ionic Salts |
Zhao | Tianxin | M.S. | 2016 | Silk Based Porous Microneedle Array for Programmable Drug Delivery |
Zhao | Wei | Ph.D. | 2011 | Flexible Transparent Electrically Conductive Polymer Films for Future Electronics |
Zhao | Zhiyang | M.S. | 2014 | Reactive Extrusion Synthesis of Ionomers |
Zhao | Zhiyang | Ph.D. | 2018 | Ionomers and their Composites as Shape Memory Polymers in Films and 3D Printing |
Zheng | Luyao | Ph.D. | 2020 | Solution-Processed Hybrid Perovskites for Photovoltaics and Thermoelectrics |
Zheng | Luyao | M.S. | 2017 | High Efficient Inverted Perovskite Hybrid Solar Cells with Interfacial Engineering of Hole Transport Layer by A Radical Polymer and a Novel Cadmium Doped Perovskite Active Layer |
Zheng | Qiang | M.S. | 1990 | Phase Transformations in Thermotropic Liquid Crystalline Copolyesters and Realted Polymer Blends |
Zheng | Yimeng | M.S. | 2014 | Evaluation of Tung Oil Based Reactive Diluents for Alkyd Coating using Experimental Design |
Zhong | Jing | Ph.D. | 2016 | Ultrasonically Aided Extrusion in Preparation of Polymer Composites with Carbon Fillers |
Zhong | Weijie | M.S. | 2015 | The Effect of Hydrophilic Monomer in Core-shell Latex |
Zhong | Yingfan | M.S. | 2016 | Layer-by-layer Rose Petal Mimic Surface for Oil/Water Separations |
Zhou | Jianguo | Ph.D. | 2007 | Processing of Generic Circuits by Conductive Adhesives: Geometrical and Rheological Considerations |
Zhou | Lei | M.S. | 2019 | Investigation of the Shape Memory Behaviour of Stearic Acid Swollen, Crosslinked EPDM Elastomers |
Zhou | Ming | Ph.D. | 2006 | Synthesis, Characterization, Phase Behavior and Rheology of Combined Main-Chain/Side-Chain Liquid-Crystalline Polymers |
Zhou | Suyuan | M.S. | 2019 | High Performance Perovskite Solar Cells by Interface Engineering and Bulk Heterojunction Device Structure |
Zhou | Xixian | Ph.D. | 1998 | Processing-Structure-Property Relationships in Uni- and Biaxially Stretched Binary and Ternary Blends |
Zhou | Yi | M.S. | 2019 | Phase Behavior of Oppositely Charged Strong Polyelectrolyte Pairs and Weak Polyelectrolyte Pairs, and Properties of Corresponding Complexes |
Zhu | Geyunjian | M.S. | 2018 | Fabrication of Slippery Liquid-infused Porous Surfaces using Layer-by-Layer Assembly: Towards Multifunctional Surfaces and Facile Fabrication Processes |
Zhu | Guangchong | M.S. | 1994 | Structure, Rheology and Mechanical Properties of Kaolin/Polyamide 6 In-Situ Composites and their Blends with Conventional Polyamides |
Zhu | Tao | M.S. | 2018 | Room Temperature Operated Solution-Processed Near-Infrared Photodetectors |
Zhuang | Ping | M.S. | 1987 | Fundamental Studies on Blends of a Thermotropic Aromatic Polyester Liquid Crystal with Thermoplastics |
Zook | Christopher | Ph.D. | 2000 | Investigation into the Dynamic Behavior of an Injection Molding Non-Return Valve |
Zou Matthews | Kunrong | M.S. | 2004 | Organic-Inorganic Hybrid Coatings Based on Cycloaliphatic Linseed Oil Epoxide |
Zou | Yu | M.S. | 2019 | Use of Pyrolyzed Soybean Hulls as Eco-Friendly Reinforcement Filler in Styrene Butadiene Rubber |
Zuo | Yuchen | M.S. | 2018 | Thermal Behaviors and NMR Investigations of Ionic Liquids under Different Degrees of Confinement |